« previous next »
Pages: [1]

Author Topic: I wonder if it will hold up?  (Read 3331 times)

0 Members and 1 Guest are viewing this topic.

Offline Eric Krewson

  • Member
  • Posts: 5,436
I wonder if it will hold up?
« on: May 13, 2015, 08:08:40 pm »
Years ago when I was making this bow I strung it up and the tip over lay came off one side and pulled a 4" chunk of wood out of the back on the overlay side that the glue was still stuck to. I threw the almost tillered bow in the corner and forgot about it. Lately I have been splicing mismatched billets and digging through piles of half completed projects where I found this damaged bow from long ago.

I needed a project so I ground the back of the bow off below the missing wood and put on a patch/extra long overlay. My patch is mostly to one grain except on the leading edge, feathered out to very thin wood where it joins the limb and glued on with Unibond.

I have tillered the bow for the most part, with a lot of pulls on my tillering tree, there are no signs of failure so far. Hopefully I can resurrect this lost cause, time will tell.

« Last Edit: May 13, 2015, 08:12:15 pm by Eric Krewson »
Logged

Offline bradsmith2010

  • Member
  • Posts: 5,187
Re: I wonder if it will hold up?
« Reply #1 on: May 13, 2015, 08:11:43 pm »
very creative save,, hope it holds,,  :)
Logged

Offline Badly Bent

  • Member
  • Posts: 3,750
Re: I wonder if it will hold up?
« Reply #2 on: May 13, 2015, 08:27:12 pm »
Nicely done, the transition looks smooth and attractive. Be interesting to see how it holds up, keep us posted.
Logged
I ain't broke but I'm badly bent.

Offline bubby

  • Member
  • Posts: 11,054
Re: I wonder if it will hold up?
« Reply #3 on: May 13, 2015, 09:07:20 pm »
It will hold some of my bows have a 5-6" glued on with TB with the nocks past the end of the stave and hold with no problem
Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline Drewster

  • Member
  • Posts: 687
Re: I wonder if it will hold up?
« Reply #4 on: May 13, 2015, 09:24:06 pm »
It looks good.  Keep us posted.
Logged
Drew - Boone, NC

Offline Badger

  • Member
  • Posts: 8,124
Re: I wonder if it will hold up?
« Reply #5 on: May 13, 2015, 09:46:19 pm »
  I think it will hold if the outer limb is stiff.
Logged

Offline George Tsoukalas

  • Member
  • Posts: 9,425
    • Traditional and Primitive Archers
Re: I wonder if it will hold up?
« Reply #6 on: May 13, 2015, 11:25:18 pm »
I hope it works. Nice fix, Eric. Jawge
Logged
Set Happens!
If you ain't breakin' you ain't makin!

Offline Peacebow_Coos

  • Member
  • Posts: 811
Re: I wonder if it will hold up?
« Reply #7 on: May 13, 2015, 11:32:26 pm »
Nice save Eric
Logged

Offline Bullitt

  • Member
  • Posts: 205
Re: I wonder if it will hold up?
« Reply #8 on: May 14, 2015, 11:16:19 am »
You do good work, Eric!  I would be happy to shoot it!

Have you seen Gary Davis' s  "Plywood" bow?
Logged

Offline Knoll

  • Member
  • Posts: 3,016
  • Mikey
Re: I wonder if it will hold up?
« Reply #9 on: May 14, 2015, 11:32:03 am »
Quote from: bubby on May 13, 2015, 09:07:20 pm
It will hold some of my bows have a 5-6" glued on with TB with the nocks past the end of the stave and hold with no problem
Quote from: Badger on May 13, 2015, 09:46:19 pm
I think it will hold if the outer limb is stiff.
Based on my bit of experience ....... what they said.
Logged
... alone in distant woods or fields, in unpretending sproutlands or pastures tracked by rabbits, even in a bleak and, to most, cheerless day .... .  I suppose that this value, in my case, is equivalent to what others get by churchgoing & prayer.  Hank Thoreau, 1857
Pages: [1]
« previous next »