« previous next »
Pages: [1]

Author Topic: More fletching  (Read 1700 times)

0 Members and 1 Guest are viewing this topic.

Offline DC

  • Member
  • Posts: 10,396
More fletching
« on: April 21, 2015, 08:02:50 pm »
In this picture you can see(I hope) where the vane base crosses from one side of the quill to the other. Should I avoid using that section? I'm thinking that when pulled straight it might affect the shape of the fletch.
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: More fletching
« Reply #1 on: April 21, 2015, 11:30:35 pm »
Remove as much of the quill as you can before grinding the final fletching.
 Have you ever tried stripping the feather from the quill?
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline DC

  • Member
  • Posts: 10,396
Re: More fletching
« Reply #2 on: April 22, 2015, 01:00:02 am »
I've tried it a few times and each time I ruined three feathers, started to swear and went back to grinding. I think I managed to properly strip two feathers out of about a dozen. Just can't seem to figure it out.
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: More fletching
« Reply #3 on: April 22, 2015, 08:01:29 am »
Have you rehydrated the feathers first before stripping.  Place them in a plastic bag with a damp cloth for a few hours first. They should strip easily and completely after that.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline DC

  • Member
  • Posts: 10,396
Re: More fletching
« Reply #4 on: April 22, 2015, 12:34:09 pm »
It occurred to me after I posted that I have a few culls in this batch of feathers. I will practice with them :D I'll re hydrate them first.
Logged
Pages: [1]
« previous next »