Author Topic: Recent  (Read 1994 times)

0 Members and 1 Guest are viewing this topic.

Offline Parnell

  • Member
  • Posts: 5,556
Recent
« on: April 16, 2015, 12:36:34 pm »
Some of you may have seen these photos, but thought I'd post last weeks stuff on here, too.

I like that point second from the left, the "ghost point" that is Georgetown.  The picture with the dogs is Alafia River Coral. Not the prettiest coral as it's kind of a flat grey and a little grainy but it looks great in the setting sun with the dogs.
1’—>1’

Offline Sasquatch

  • Member
  • Posts: 1,026
Re: Recent
« Reply #1 on: April 16, 2015, 01:07:58 pm »
Good points brother.  I see a flaker behind the points.  If that is yours then here is some advice, if not ignore. I would round those edges so that you can put maximum pressure on it without it hurting your hand.  Then I would sharpen that copper tip.   It looks like your tip is bending.  If so then take that copper and twist it in a drill.  This will harden the copper.

Offline cowboy

  • Member
  • Posts: 7,035
  • Paul Wolfe. Springtown, TX
Re: Recent
« Reply #2 on: April 16, 2015, 01:20:41 pm »
Nice set of points! Some good looking rock too.
When you come upon a track or trail you do not know, follow it to the point of knowing.

Offline bowmo

  • Member
  • Posts: 1,035
Re: Recent
« Reply #3 on: April 16, 2015, 01:42:24 pm »
Lookin good. Those two on the right match nicely.

Offline JackCrafty

  • Global Moderator
  • Member
  • Posts: 5,628
  • Sorry Officer, I was just gathering "materials".
Re: Recent
« Reply #4 on: April 16, 2015, 04:26:02 pm »
 8)
Any critter tastes good with enough butter on it.

Patrick Blank
Midland, Texas
Youtube: JackCrafty, Allergic Hobbit, Patrick Blank

Where's Rock? Public Waterways, Road Cuts, Landscape Supply, Knap-Ins.
How to Cook It?  200° for 24hrs then 275° to 500° for 4hrs (depending on type), Cool for 12hr

Offline Majuba Tom

  • Member
  • Posts: 275
Re: Recent
« Reply #5 on: April 16, 2015, 07:25:09 pm »
Nice chipping.

Good points brother.  I see a flaker behind the points.  If that is yours then here is some advice, if not ignore. I would round those edges so that you can put maximum pressure on it without it hurting your hand.  Then I would sharpen that copper tip.   It looks like your tip is bending.  If so then take that copper and twist it in a drill.  This will harden the copper.

Now if you do not feel like twisting your copper to work harden it. Try some brass that is what I use. It is a little harder than copper but not much. It works well on the hard rock I beat on.

Tom[

Offline Parnell

  • Member
  • Posts: 5,556
Re: Recent
« Reply #6 on: April 16, 2015, 10:09:01 pm »
Good suggestions guys, thanks!  Sasquatch, I'll try that.
1’—>1’

Offline soy

  • Member
  • Posts: 2,897
  • pm106221
Re: Recent
« Reply #7 on: April 18, 2015, 02:08:30 am »
👍  ;)
Is this bow making a sickness? or the cure...