« previous next »
Pages: [1]

Author Topic: Matching arrows  (Read 3931 times)

0 Members and 1 Guest are viewing this topic.

Offline DC

  • Member
  • Posts: 10,396
Matching arrows
« on: March 31, 2015, 05:55:51 pm »
 I'm trying to make a matched set of arrows. I'm assuming I want the spine, total weight and FOC(maybe other stuff?) to be the same. Is there a sequence of doing this so that one change doesn't affect the others?
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Matching arrows
« Reply #1 on: March 31, 2015, 08:05:10 pm »
What shafting are you using to make the arrows?
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline DC

  • Member
  • Posts: 10,396
Re: Matching arrows
« Reply #2 on: March 31, 2015, 08:42:59 pm »
Bamboo
Logged

Offline duke3192

  • Member
  • Posts: 195
  • pm109331
Re: Matching arrows
« Reply #3 on: March 31, 2015, 09:50:08 pm »
Ain't gonna work, you can do a hundred cane shafts to get twelve that closely matched. Also by bamboo, what kind, river cane, tecta, hill cane, tonkin cane, japanese arrow cane, you see the problem. A lot of work in doing really matched cane arrows. Aside, The Japanese do a two piece set of matched arrows for their competions that can cost a $100+.
Logged
charter member of traditional bow hunters of Florida.

Offline Danzn Bar

  • Member
  • Posts: 4,166
Re: Matching arrows
« Reply #4 on: April 01, 2015, 09:34:40 am »
A matching set of cane/boo arrows to me, means spine within 5-10#, the overall weight within 50-75 gr and arrow length within 1/2" long.
And yes, it takes a lot of shafts to get a dozen arrows within this group.
DBar
Logged
Integrity is doing the right thing when no one is looking

Offline aaron

  • Member
  • Posts: 1,037
Re: Matching arrows
« Reply #5 on: April 01, 2015, 10:44:14 am »
Quote from: Danzn Bar on April 01, 2015, 09:34:40 am
A matching set of cane/boo arrows to me, means spine within 5-10#, the overall weight within 50-75 gr and arrow length within 1/2" long.
And yes, it takes a lot of shafts to get a dozen arrows within this group.
DBar
+1
Logged
Ilwaco, Washington, USA
"Good wood makes great bows, but bad wood makes great bowyers"

Offline DC

  • Member
  • Posts: 10,396
Re: Matching arrows
« Reply #6 on: April 01, 2015, 11:25:11 am »
So you don't worry about FOC?
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Matching arrows
« Reply #7 on: April 01, 2015, 12:16:53 pm »
Most cane arrows are heavier FOC because of their natural shape. When I make cane arrows I only check spine to find the stiff side which goes against the bow. I also make cane arrows longer...30 for my 26" draw. I think this helps the arrow get around the bow easier.
 You can make cane arrows that are perfectly matched but they are a lot more work and not really necessary.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Danzn Bar

  • Member
  • Posts: 4,166
Re: Matching arrows
« Reply #8 on: April 01, 2015, 05:26:31 pm »
+1 what Pat B said about FOC..................... On cane/boo shafts if the diameter of the ends and the weight is close the FOC will automatically be very close as well.
DBar
Logged
Integrity is doing the right thing when no one is looking

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Matching arrows
« Reply #9 on: April 01, 2015, 05:43:17 pm »
...also that natural taper helps cane arrows more draw weight tolerant .
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline jeffp51

  • Member
  • Posts: 1,641
Re: Matching arrows
« Reply #10 on: April 01, 2015, 08:32:43 pm »
Sorry, What is FOC?
Logged

Offline bubbles

  • Member
  • Posts: 932
  • PM110769
Re: Matching arrows
« Reply #11 on: April 01, 2015, 08:39:57 pm »
Forward of center I think. Has to do with the weight distribution of your arrows.  Basically  its the location of the balance point of your arrow and the distance forward of center that the balance point is located. Usually  expressed %FOC
Logged
Pages: [1]
« previous next »