« previous next »
Pages: [1]

Author Topic: Dry heat after Tru Oil ?  (Read 3082 times)

0 Members and 1 Guest are viewing this topic.

Offline IndianKid

  • Member
  • Posts: 55
Dry heat after Tru Oil ?
« on: March 22, 2015, 02:03:26 pm »
So the weather is getting better and threw the string on my last build,
so looking forward to shooting it ...
well something moved, after a bunch of coats with tru oil
and now the string at brace is like 2, maybe 3" to the left
at brace :(

So my question, has anyone used a heat gun after tru oil
or will i need to sand off finish ?

I figure a tiny bend at the handle would fix me up nice, but
didn't know if I had to sand down the finish 1st...

Logged

Offline GB

  • Member
  • Posts: 519
Re: Dry heat after Tru Oil ?
« Reply #1 on: March 22, 2015, 02:45:40 pm »
I haven't done it with Tru Oil, but I've done heat corrections after putting Watco Satin Wax finish on a bow.  It worked fine, but I dialed the heat down one setting.  Had to be careful not to scorch the finish.
Logged
Yeah, I remember when we had a President who didn't wear a tinfoil hat.

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Dry heat after Tru Oil ?
« Reply #2 on: March 22, 2015, 03:24:20 pm »
You should scrape the Tru-Oil off the area to be heated before you heat it. Tru-Oil is easy to repair by hitting that area with 0000 steel wool then add more Tru-Oil.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline IndianKid

  • Member
  • Posts: 55
Re: Dry heat after Tru Oil ?
« Reply #3 on: March 22, 2015, 09:43:34 pm »
guess i will take a better look at it and see where the movement happened
before I decide how to fix.. stay tuned,  there's a 99% chance that I
will be looking for a little wisdom. ...
Logged

Offline osage outlaw

  • Member
  • Posts: 11,962
Re: Dry heat after Tru Oil ?
« Reply #4 on: March 22, 2015, 10:59:29 pm »
Your string alignment moving 2"-3" after you finished the bow doesn't sound good at all.  Messing up the tru oil finish might be the least of your worries.
Logged
I started out with nothin' and I still got most of it left

mikekeswick

  • Guest
Re: Dry heat after Tru Oil ?
« Reply #5 on: March 23, 2015, 04:05:40 am »
The stave couldn't have been dry. Next time make super sure it's dry.
Logged

Offline IndianKid

  • Member
  • Posts: 55
Re: Dry heat after Tru Oil ?
« Reply #6 on: March 23, 2015, 10:57:20 am »
Your 100% right, I kinda new it needed to dry a tad more...
problem was i couldn't stop fiddling with it...
Kept saying well, I come this far might as well go a hair more
and before I knew it, well.. im sure you know  ;D

Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Dry heat after Tru Oil ?
« Reply #7 on: March 23, 2015, 01:22:39 pm »
Patience grasshopper!  ;)
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC
Pages: [1]
« previous next »