« previous next »
Pages: [1]

Author Topic: Tillering Help  (Read 1073 times)

0 Members and 1 Guest are viewing this topic.

Offline chesticles

  • Member
  • Posts: 3
Tillering Help
« on: March 19, 2015, 03:23:01 pm »
Hi, I am new to bow building, this is my first attempt.  It is osage and 63" ntn.  I was wondering what you think of the tiller.  I know the right limb is alittle funky but i am not sure what i need to do to fix it.  Any help is appreciated.
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,637
Re: Tillering Help
« Reply #1 on: March 19, 2015, 03:33:34 pm »
Looks to me like from the fade on the right limb out about 12" is stiff. The tiller is also uneven but if you get the right limb bending a bit it should even out.
  Welcome to PA.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline chesticles

  • Member
  • Posts: 3
Re: Tillering Help
« Reply #2 on: March 19, 2015, 03:51:57 pm »
I though so but i figured I would ask someone who knew what they were talking about.  Thanks for the help
Logged

Offline bubby

  • Member
  • Posts: 11,054
Re: Tillering Help
« Reply #3 on: March 19, 2015, 04:42:48 pm »
Pat has the inner nailed, out is pretty stiff too don't touch the mid where it's bending to much
Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline chesticles

  • Member
  • Posts: 3
Re: Tillering Help
« Reply #4 on: March 19, 2015, 06:21:21 pm »
So we covered the right limb.  Is the left limb looking ok?
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,637
Re: Tillering Help
« Reply #5 on: March 19, 2015, 07:02:53 pm »
Fix the right limb then we will look at the tiller again.  ;)     Baby steps!
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC
Pages: [1]
« previous next »