« previous next »
Pages: [1]

Author Topic: Oak board bow input request?  (Read 2510 times)

0 Members and 1 Guest are viewing this topic.

Offline sieddy

  • Member
  • Posts: 708
  • Guaranga! :)
Oak board bow input request?
« on: March 30, 2015, 05:22:21 pm »
Hi all I went to work on the board bow I posted about recently. It's 64" tip to tip and is pulling 38# @ 26".  I'm really happy with it but think it might need a bit more work on the lower limb. I'd like to get the tiller ok before I start finishing it. Some honest critique would be gratefully received. Thanks  :)
Logged
"No man ever broke his bow but another man found a use for the string" Irish proverb

Offline bushboy

  • Member
  • Posts: 2,256
Re: Oak board bow input request?
« Reply #1 on: March 30, 2015, 06:26:31 pm »
Brace looks pretty good.hard to see the tiller because of the angle.maybe try a new FD shot with good back ground like you house at more of a right angle.
Logged
Some like motorboats,I like kayaks,some like guns,I like bows,but not the wheelie type.

Offline sieddy

  • Member
  • Posts: 708
  • Guaranga! :)
Re: Oak board bow input request?
« Reply #2 on: March 30, 2015, 06:42:30 pm »
Thanks Bushboy! Here's another picture which is not much better but more at a right angle.  :)
Logged
"No man ever broke his bow but another man found a use for the string" Irish proverb

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: Oak board bow input request?
« Reply #3 on: March 30, 2015, 07:10:29 pm »
Lower fade could be stiff. 
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline Eric Krewson

  • Member
  • Posts: 5,432
Re: Oak board bow input request?
« Reply #4 on: March 30, 2015, 08:08:14 pm »
Yep, lower fade is stiff.
Logged

Offline George Tsoukalas

  • Member
  • Posts: 9,425
    • Traditional and Primitive Archers
Re: Oak board bow input request?
« Reply #5 on: March 30, 2015, 09:09:26 pm »
Both limbs look to need the near  handle wood moving. Is the lower limb shorter?
Jawge
Logged
Set Happens!
If you ain't breakin' you ain't makin!

Offline crooketarrow

  • Member
  • Posts: 2,790
Re: Oak board bow input request?
« Reply #6 on: March 30, 2015, 11:11:56 pm »
  Did you mean to make the bottom limb that short.
Logged
DEAD IS DEAD NO MATTER HOW FAST YOUR ARROW GETS THERE
20 YEARS OF DOING 20 YEARS OF LEARNING 20 YEARS OF TEACHING

Offline sieddy

  • Member
  • Posts: 708
  • Guaranga! :)
Re: Oak board bow input request?
« Reply #7 on: March 31, 2015, 03:01:40 am »
The limbs are the same length (you all had me worried there!) it's weird how they look so different in the photos!  ???
Anyway thanks for the input I'll get busy on the fades.
Logged
"No man ever broke his bow but another man found a use for the string" Irish proverb
Pages: [1]
« previous next »