« previous next »
Pages: [1]

Author Topic: oak arrows  (Read 2837 times)

0 Members and 1 Guest are viewing this topic.

Offline Twids

  • Member
  • Posts: 2
oak arrows
« on: January 31, 2015, 01:27:24 am »
Hi  am making oak arrows from plank have split with axe and draw plain down to an octagon now using a small plain. can i go down to a barrelled 11/32 with 5/16th ends or will it be to brittle. am using a bikerstaff 48lb at 28 but only draw 25.
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: oak arrows
« Reply #1 on: January 31, 2015, 09:11:07 am »
You should be able to barrel or full length taper with no problems.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Springbuck

  • Member
  • Posts: 1,545
Re: oak arrows
« Reply #2 on: January 31, 2015, 05:36:24 pm »
Quote from: Pat B on January 31, 2015, 09:11:07 am
You should be able to barrel or full length taper with no problems.

Especially if you split down your blanks instead of rip cutting and dowelling.  Plenty of strength.
Logged

Offline Twids

  • Member
  • Posts: 2
Re: oak arrows
« Reply #3 on: February 03, 2015, 12:38:31 am »
cool thanks. i split two with the axe and one with a saw. only had enough for three but will keep at it.
Logged
Pages: [1]
« previous next »