« previous next »
Pages: [1]

Author Topic: I have a vision!  (Read 3235 times)

0 Members and 1 Guest are viewing this topic.

Offline Blaflair2

  • Member
  • Posts: 2,042
I have a vision!
« on: January 14, 2015, 03:10:45 pm »
I had to scrap the osage takedown, the wood was just too checked, damn dead standing osage. I wanna make a lam takedown, white oak backing with ipe belly, my question...

I can't cut fades persice enough IMO for a glue up, I was thinking of trying to get a riser blank and sandwhich it between the oak and ipe, but backwards, with the oak going up the fade on the back and ipe on the belly, would this work or am I nuts!
Logged
Nothing ventured nothing gained

Offline Blaflair2

  • Member
  • Posts: 2,042
Re: I have a vision!
« Reply #1 on: January 14, 2015, 03:13:34 pm »
Also was thinking of long feathered wedges, which I may be able to make

Another thought, if I added a tapered maple lam under the oak would that help my chances
« Last Edit: January 14, 2015, 03:21:33 pm by Blaflair2 »
Logged
Nothing ventured nothing gained

Offline bubby

  • Member
  • Posts: 11,054
Re: I have a vision!
« Reply #2 on: January 14, 2015, 04:15:30 pm »
Are you talking about a power lam ?
Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline Blaflair2

  • Member
  • Posts: 2,042
Re: I have a vision!
« Reply #3 on: January 14, 2015, 04:54:40 pm »
No, I'll try and doodle something and post it
Logged
Nothing ventured nothing gained

Offline Blaflair2

  • Member
  • Posts: 2,042
Re: I have a vision!
« Reply #4 on: January 14, 2015, 05:50:38 pm »
It won't let me add pix for some reason. I want a forward grip with a hill style/black widow fade area.

IF that isn't gonna work my other idea was building a long wedge like riser
Logged
Nothing ventured nothing gained

Offline bubby

  • Member
  • Posts: 11,054
Re: I have a vision!
« Reply #5 on: January 14, 2015, 08:31:34 pm »
If you can't do it you can buy one , or spend that money on what you need to do it, I've done those with a rasp and belt sander
Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline Blaflair2

  • Member
  • Posts: 2,042
Re: I have a vision!
« Reply #6 on: January 14, 2015, 08:49:27 pm »
I'm not so confidant in myself, and should I use ipe or osage? And how long u recommend? I was thinkin 64-62"

I have a bunch of English walnut I wanna use for the riser. But like I said, I don't wanna mess it up. Know any build alongs for one?
Logged
Nothing ventured nothing gained

Offline bubby

  • Member
  • Posts: 11,054
Re: I have a vision!
« Reply #7 on: January 14, 2015, 11:02:04 pm »
I realy need to see a drawing of what you want to make an intelligent answer
Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline Blaflair2

  • Member
  • Posts: 2,042
Re: I have a vision!
« Reply #8 on: January 14, 2015, 11:10:19 pm »
Like this but with the fades on the back. A forward handle
Logged
Nothing ventured nothing gained

Offline Blaflair2

  • Member
  • Posts: 2,042
Re: I have a vision!
« Reply #9 on: January 14, 2015, 11:11:56 pm »
Make sense? The oak backing will come up the fades and the ipe will be the flat belly coming out of the sleeve.
Logged
Nothing ventured nothing gained

Offline bubby

  • Member
  • Posts: 11,054
Re: I have a vision!
« Reply #10 on: January 15, 2015, 12:06:29 am »
That should be doable if you have a belt sander use the nose to feather it out and glue it to the belly then steam the backing strips and clamp it to to riser, I'd cut a pc to fit n to use to clamp it
Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline Blaflair2

  • Member
  • Posts: 2,042
Re: I have a vision!
« Reply #11 on: January 15, 2015, 01:11:15 am »
The sleeve I have is a small D. I was thinking of starting at 1 3/8" wide 64" long. And adjust
Logged
Nothing ventured nothing gained
Pages: [1]
« previous next »