« previous next »
Pages: [1]

Author Topic: Ash board bow ... temper now?  (Read 1641 times)

0 Members and 1 Guest are viewing this topic.

Offline Knoll

  • Member
  • Posts: 3,016
  • Mikey
Ash board bow ... temper now?
« on: December 20, 2014, 02:11:41 pm »
I'm in midst of tillering an ash board into a bow.  Objective is 35-38# @ 29".  Bow is 65" ntn with glue-on 9" riser and glue-on static curved tips.  Am now at 27" draw, 6 1/2" brace, and 39# pull.

Have about 1 1/2" set.  So considering heat tempering some reflex into this stick.  But a bit concerned about the combo of lotsa heat and the glue lines at fades and tips.

Advice from those who have tried tempering boards with glue lines would be most appreciated.

« Last Edit: December 20, 2014, 04:00:34 pm by Knoll »
Logged
... alone in distant woods or fields, in unpretending sproutlands or pastures tracked by rabbits, even in a bleak and, to most, cheerless day .... .  I suppose that this value, in my case, is equivalent to what others get by churchgoing & prayer.  Hank Thoreau, 1857

Offline wizardgoat

  • Member
  • Posts: 2,397
Re: Ash board bow ... temper now?
« Reply #1 on: December 20, 2014, 03:39:21 pm »
If it's only a glue on riser and tip, I've heard of guys wrapping a wet rag around those parts and heating away. 
Logged
Pages: [1]
« previous next »