« previous next »
Pages: [1]

Author Topic: Imminent belly failure  (Read 3380 times)

0 Members and 1 Guest are viewing this topic.

Offline Chadwick

  • Member
  • Posts: 161
  • Knock off everything that ain't a bow.
    • Primal Archery
Imminent belly failure
« on: November 23, 2014, 05:36:30 pm »
Working a bamboo/purpleheart/osage/walnut composite. I needed to leave more belly and or length, if it'll be walnut.

Oh, and if this was about my personal anatomy, the belly failure already occurred. :)
Logged
Nothing flying, Nothing dying

Offline bow101

  • Member
  • Posts: 2,235
Re: Imminent belly failure
« Reply #1 on: November 23, 2014, 05:51:29 pm »
Oh well lesson learned move on to another one.  The bow looks short and to heavy to make an even bend.
Logged
"The privilege of a lifetime is being who you are."  Joseph Campbell

Offline George Tsoukalas

  • Member
  • Posts: 9,425
    • Traditional and Primitive Archers
Re: Imminent belly failure
« Reply #2 on: November 23, 2014, 06:01:53 pm »
The limbs look pretty thick to bend much. Perhaps, you forced it. Jawge
Logged
Set Happens!
If you ain't breakin' you ain't makin!

Offline Chadwick

  • Member
  • Posts: 161
  • Knock off everything that ain't a bow.
    • Primal Archery
Re: Imminent belly failure
« Reply #3 on: November 23, 2014, 06:06:24 pm »
Maybe it's not as thick as it looks. It was pulling 40# at 20" when I noticed fatal flaws.
Logged
Nothing flying, Nothing dying

Offline GB

  • Member
  • Posts: 519
Re: Imminent belly failure
« Reply #4 on: November 23, 2014, 06:28:35 pm »
If you try it again, use the osage for the belly and walnut for the core.  Osage is much stronger and way more elastic.
Logged
Yeah, I remember when we had a President who didn't wear a tinfoil hat.

mikekeswick

  • Guest
Re: Imminent belly failure
« Reply #5 on: November 24, 2014, 02:32:42 am »
You've got to be gentle, gentle when using walnut for a belly. It's very soft and not very dense the best backing for it is ash imo.
Logged

blackhawk

  • Guest
Re: Imminent belly failure
« Reply #6 on: November 24, 2014, 08:20:53 am »
Lots going wrong there...put the walnut in the core n osage on the belly...IF you just have to have walnut as a belly use maple,ash etc(one of the lesser overpowering Whitewood's for backing),and then you have to go longer and much much wider than what you have....trying to use walnut as a belly in lam bows is a waste of time n materials IMO....I'd grind off the walnut n glue on some osage to save that if that's what ya wanna do
Logged

Offline Springbuck

  • Member
  • Posts: 1,545
Re: Imminent belly failure
« Reply #7 on: November 30, 2014, 03:34:13 pm »
  Walnt belly, bamboo back and a thick cross section is asking a lot of walnut.  The only good walnut bows I have made were hickory backed or self bows and 2.25" wide or so.
Logged

Offline Tree_Ninja

  • Member
  • Posts: 181
  • Clandestine Bow-ops
Re: Imminent belly failure
« Reply #8 on: November 30, 2014, 03:41:07 pm »


   That's a shame, looks like a lot of work went into that.  I get upset if I take too much off of a self-bow stave and it lowers the draw weight.

   I couldn't imagine the work that went into cleaning up those ply's and glue-up.   Maybe you could salvage the handle and glue it in-between some full-length boards/plys......  bamboo flooring?
Logged
Pages: [1]
« previous next »