« previous next »
Pages: [1]

Author Topic: your thoughts on a high humidity design around 12 percent.  (Read 1497 times)

0 Members and 1 Guest are viewing this topic.

birdpointlightstring32

  • Guest
your thoughts on a high humidity design around 12 percent.
« on: November 12, 2014, 01:37:52 am »
Just curious my two cents . 75 inches long or longer. slightly over built? as suggested by others maybe yew locust or maybe a wood that is tension weak and compression strong.
Logged

mikekeswick

  • Guest
Re: your thoughts on a high humidity design around 12 percent.
« Reply #1 on: November 12, 2014, 03:12:27 am »
Yew or ipe. Ipe is superb in humidity. Any design will work if you start with the right materials.
Logged

Offline Parnell

  • Member
  • Posts: 5,556
Re: your thoughts on a high humidity design around 12 percent.
« Reply #2 on: November 12, 2014, 12:06:23 pm »
Simple.  Make any bow out of Osage.
Doesn't get much more humid than where I live and Osage doesn't seem to be affected.
Logged
1’—>1’

Offline huisme

  • Member
  • Posts: 1,036
  • I'm Marc, but not that Marc.
Re: your thoughts on a high humidity design around 12 percent.
« Reply #3 on: November 12, 2014, 12:41:31 pm »
Locust is fine with humidity and makes fast bows even therein.
Logged
50#@26"
Black locust. Black locust everywhere.
Mollegabets all day long.
Might as well make them short, save some wood to keep warm.

Offline Springbuck

  • Member
  • Posts: 1,545
Re: your thoughts on a high humidity design around 12 percent.
« Reply #4 on: November 12, 2014, 01:28:39 pm »
Also most good white woodsdo better in humidity after heat treating the belly.  Still likely not as good as ipe, but....
Logged
Pages: [1]
« previous next »