Author Topic: Ottawa Plum Bow  (Read 14578 times)

0 Members and 1 Guest are viewing this topic.

Offline Badger

  • Member
  • Posts: 8,124
Re: Ottawa Plum Bow
« Reply #45 on: November 08, 2014, 10:59:36 pm »
   I think plum would have been the longbow wood of choice instead of yew had sufficient quantities of straight wood been available. Not taking anything way from yew which is fantastic, I just think plum is first grade wood in all respects. Jaro made a long bow from plum a few years ago. I need to check with him on how it came out.

Offline Scottski

  • Member
  • Posts: 462
Re: Ottawa Plum Bow
« Reply #46 on: November 08, 2014, 11:15:29 pm »
Very nice bow Sir.
Did the Native Americans think about all this that much or just do it?

Offline redhawk55

  • Member
  • Posts: 122
    • bowXplosion
Re: Ottawa Plum Bow
« Reply #47 on: November 09, 2014, 04:12:49 am »
Marc, this is a great bow! Even I wouldn't know the bowyer, I would guess Marc St. Louis is the bowyer. The bow is definitely Marc. St.Louis- style.
Any chronos?
All the plum I've came across. was heavily twisted and splintered. Years ago I shot a plum- bow. I guess a clean plum stave is as good as osage.
Michael
..........the way of underdoing.............

Offline Marc St Louis

  • Administrator
  • Member
  • Posts: 7,877
  • Keep it flexible
    • Marc's Bows and Arrows
Re: Ottawa Plum Bow
« Reply #48 on: November 09, 2014, 07:02:06 pm »
Thanks again

Finding wood that is relatively clean of branches is a problem.  In some ways it is easier to work than Osage

I've been shooting the bow on and off and it is very fast, considerably faster than the 3 lam ERC bow I made a few months ago of the same draw weight and they both have about the same amount of reflex.
Home of heat-treating, Corbeil, On.  Canada

Marc@Ironwoodbowyer.com

Offline Aussie Yeoman

  • Member
  • Posts: 125
Re: Ottawa Plum Bow
« Reply #49 on: November 10, 2014, 04:16:11 am »
Hi Marc,

could you spare a moment to go through how you split up the dimensions of this bow? As in, upper/lower limb, height above center of the arrow pass, that sort of thing.

On backing twisted wood: if the backing is sound, you can use pretty much any grained wood you like. I used to agonise over picking just the right board for bamboo backing, and discovered years later, to my delight, that I could use highly figured, twisted and knotted wood...saving myself lots of time in the timber shop and making more interesting looking bows.

Dave
Articles for the beginning bowyer, with Australian bowyers in mind:

http://www.tharwavalleyforge.com/articles/tutorials

Offline Marc St Louis

  • Administrator
  • Member
  • Posts: 7,877
  • Keep it flexible
    • Marc's Bows and Arrows
Re: Ottawa Plum Bow
« Reply #50 on: November 10, 2014, 04:55:05 pm »
Equal length limbs Dave put the arrow pass about 1 1/2" above center
Home of heat-treating, Corbeil, On.  Canada

Marc@Ironwoodbowyer.com

Offline Aussie Yeoman

  • Member
  • Posts: 125
Re: Ottawa Plum Bow
« Reply #51 on: November 11, 2014, 03:22:16 am »
Thanks Marc.

Is that a fairly standard configuration, even in your shorter bows?
Articles for the beginning bowyer, with Australian bowyers in mind:

http://www.tharwavalleyforge.com/articles/tutorials

Offline Marc St Louis

  • Administrator
  • Member
  • Posts: 7,877
  • Keep it flexible
    • Marc's Bows and Arrows
Re: Ottawa Plum Bow
« Reply #52 on: November 11, 2014, 09:24:25 am »
I prefer equal length limbs Dave
Home of heat-treating, Corbeil, On.  Canada

Marc@Ironwoodbowyer.com