Author Topic: Brain Tanning  (Read 8151 times)

0 Members and 1 Guest are viewing this topic.

Offline RyanR

  • Member
  • Posts: 833
Re: Brain Tanning
« Reply #15 on: November 11, 2014, 09:42:24 pm »
I may have to put that book on my Christmas list. I have 3 brains and 3 hides in the freezer so I should be all set.

Offline lenador

  • Member
  • Posts: 193
Re: Brain Tanning
« Reply #16 on: November 11, 2014, 10:49:21 pm »
Okay I gave brain tanning a shot. It worked pretty good but I couldn't flesh the hide well enough so some sections didn't turnout very soft. That was my fault though. Time to invest in a fleshing knife.
Failure isn't a loss unless you cease to move forward from it.

Offline Pappy

  • Global Moderator
  • Member
  • Posts: 32,204
  • if you have to ask you wouldn't understand ,Tenn.
Re: Brain Tanning
« Reply #17 on: November 12, 2014, 05:11:39 am »
I use a dull draw knife with the hide on a fleshing beam,[ 8 inch Poplar tree split in half ] it also works much better fresh or wet if you had it frozen, if it starts to dry out it makes fleshing it much tougher.  :)
   Pappy
Clarksville,Tennessee
TwinOaks Bowhunters
Life is Good

Offline Saxton

  • Member
  • Posts: 24
Re: Brain Tanning
« Reply #18 on: December 18, 2014, 01:51:05 am »
I just bought Deerskins to Buckskins by Matt Richards.

Really good book, this guy knows how to convey what's needed to tan so that it is understandable.

From the sheer number of times I have heard people recommend that book, I have to assume it qualifies as a good reference on the subject.
I went from my first buckskin(Rawhide)sounding like popcorn in my hands, to my second a soft smooth piece of buckskin following that step by step . it saves a lot of guess work in brain tanning if you have no one around to show you the ropes .

Offline tipi stuff

  • Member
  • Posts: 311
  • Curtis Carter
Re: Brain Tanning
« Reply #19 on: December 19, 2014, 09:22:16 pm »
If most of the hide comes out pretty soft, but you still have a few stiff areas: smoke it real good and then brain it again. The soft parts will stay soft and you only need to work on the stiff areas. Curtis