Thin super glue?

[Prarie Bowyer]

Which of the glues on the market are thin?  It seem like I wind up with a lot of the thick stuff lately.  Which is thin?

[lebhuntfish]

I like tight bonds "instabond" really thin and amazingly strong. Had an old boyer tell me he never used anything better than "zap a gap" Patrick

[Drewster]

Loctite 420 is very thin and will penetrate cracks extremely well......a bit expensive though, but worth every penny when you really need it.

[jeffp51]

go to a hobby shop that sells model airplane supplies.  they will have one-ounce bottles marked thin, medium, and thick.  Medium is good for most aplications--like fletching, but I always have a bottle of thin and one of medium.  If you store it in the freezer, it lasts longer.

[wizardgoat]

i use the "hot stuff", you get at Lee Valley. it comes in a red bottle, is as runny as water and dries quick

[Del the cat]

I just search that well known auction site for low viscosity superglue. I've had some V good stuff at good price too.
Some is so low viscosity it jumps out of the bottle
Del

[Gsulfridge]

I just search that well known auction site for low viscosity superglue. I've had some V good stuff at good price too.
Some is so low viscosity it jumps out of the bottle
Del

I've seen some low viscosity/ high octane stuff like that, but it was in a Mason jar

[Blaflair2]

I get this stuff from work called zip grip. Super thing and strong

[Pat B]

I buy whatever is handy at Wal-Mart or our local ACE Hardware. Unless it says "GEL" it is always thin.

[Prarie Bowyer]

Hobby shop is 45 min drive for a big bottle.  I'm in the country so I don't get a lot of selection.  Have an ace thiesens and walmart.


Hate to match its price in shipping.

 Think I can get the lock tight.