« previous next »
Pages: [1]

Author Topic: large diameter osage heat straightening help  (Read 2202 times)

0 Members and 1 Guest are viewing this topic.

Offline sleek

  • Member
  • Posts: 6,764
large diameter osage heat straightening help
« on: January 07, 2015, 07:49:49 pm »
I have a piece of osage that has a few kinks in it. The kink im working now is 1x1.25 thick and wide. Best to just use a heat gun and clamp or is there better ways?
Logged
Tread softly and carry a bent stick.

Dont seek your happiness through the approval of others

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: large diameter osage heat straightening help
« Reply #1 on: January 07, 2015, 10:47:03 pm »
Something that thick and wide I'd steam it for a long time. You have to heat the wood all the way through.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Badger

  • Member
  • Posts: 8,124
Re: large diameter osage heat straightening help
« Reply #2 on: January 08, 2015, 02:48:40 am »
 Pat is right steam for at least 1 1/2 hours and even then a tight kink won't come out.
Logged

Offline Pappy

  • Global Moderator
  • Member
  • Posts: 32,204
  • if you have to ask you wouldn't understand ,Tenn.
Re: large diameter osage heat straightening help
« Reply #3 on: January 08, 2015, 05:00:51 am »
I would get it closer to bow dimension's before trying much straighting .
   Pappy
Logged
Clarksville,Tennessee
TwinOaks Bowhunters
Life is Good

blackhawk

  • Guest
Re: large diameter osage heat straightening help
« Reply #4 on: January 08, 2015, 08:29:50 am »
+1 pappy....is it in the limbs or are your trying to make a bend/correction in the handle area? I've been able to make dry heat corrections in stiff handled osage bows...it ain't easy but it can be done.
Logged
Pages: [1]
« previous next »