« previous next »
Pages: [1]

Author Topic: Yew Bending with steam  (Read 1474 times)

0 Members and 1 Guest are viewing this topic.

Offline BrokenArrow

  • Member
  • Posts: 168
Yew Bending with steam
« on: September 15, 2014, 12:25:25 pm »
At what part of the tillering process should I recurve the yew bow using steam before putting it in a bending jig?
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Yew Bending with steam
« Reply #1 on: September 15, 2014, 12:31:56 pm »
Any time after floor tiller, once the tips are thin enough. If it were me I'd seal the wood with shellac before steaming to prevent it from taking on moisture from the steam.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline BrokenArrow

  • Member
  • Posts: 168
Re: Yew Bending with steam
« Reply #2 on: September 15, 2014, 12:55:04 pm »
The bow is pretty much finished. Should I shallac it and then bend the whole thing?
Why should it not have steam penetrate it?
Logged
Pages: [1]
« previous next »