« previous next »
Pages: [1]

Author Topic: Splitting from the middle  (Read 2025 times)

0 Members and 1 Guest are viewing this topic.

Offline DC

  • Member
  • Posts: 10,396
Splitting from the middle
« on: September 10, 2014, 12:00:19 pm »
i got three Douglas Maple staves yesterday from the same tree. The middle one is just about 3" where the handle would be. If I cut a kerf through the middle in the handle area and split from the center out both ways would it put extra strain on the wood at that point? I could get two staves that way and splitting from the end might run out and leave me with just one.
Thanks
Don
Logged

Offline Blaflair2

  • Member
  • Posts: 2,042
Re: Splitting from the middle
« Reply #1 on: September 10, 2014, 12:03:51 pm »
Your limbs are gonna have to be pretty wide at the fades. So I wouldn't. I don't think Douglas fir makes a good bow. Maybe I'm wrong.
Logged
Nothing ventured nothing gained

Offline DC

  • Member
  • Posts: 10,396
Re: Splitting from the middle
« Reply #2 on: September 10, 2014, 12:11:23 pm »
Douglas MAPLE. Same guy, different tree. ;D ;D ;D
Logged

Offline Blaflair2

  • Member
  • Posts: 2,042
Re: Splitting from the middle
« Reply #3 on: September 10, 2014, 12:12:42 pm »
Haha. My bad. I read wrong. Still the limbs at the fade will probly be around 1 3/4-2" so I'd leave it
Logged
Nothing ventured nothing gained

Offline IdahoMatt

  • Member
  • Posts: 2,093
Re: Splitting from the middle
« Reply #4 on: September 10, 2014, 12:34:42 pm »
That maple doesn't want to split good from my experience.  I would saw it in half if you have the means to do so.   :)
Logged

Offline DC

  • Member
  • Posts: 10,396
Re: Splitting from the middle
« Reply #5 on: September 10, 2014, 01:15:25 pm »
Mine is spitting real nice. ;D   Now if I'd cut it in the spring so the bark would come off >:(
Logged
Pages: [1]
« previous next »