Author Topic: Succession knife blade  (Read 2220 times)

0 Members and 1 Guest are viewing this topic.

Offline Sasquatch

  • Member
  • Posts: 1,026
Succession knife blade
« on: August 15, 2014, 04:27:25 pm »
I took about an hr yesterday and busted this out with some inspiration from Tower. I'll have to haft it up soon.

Offline Knapper

  • Member
  • Posts: 1,057
  • David Atnip
Re: Succession knife blade
« Reply #1 on: August 15, 2014, 06:06:47 pm »
Squatch, You nailed that one, can't wait to see it lashed to a bone!
Knapper
Ad Dare Servire
PM104250

Offline bryan irwin

  • Member
  • Posts: 671
Re: Succession knife blade
« Reply #2 on: August 15, 2014, 07:54:04 pm »
thats a nice one
bryan irwin

Offline Zuma

  • Member
  • Posts: 4,324
Re: Succession knife blade
« Reply #3 on: August 15, 2014, 10:18:19 pm »
Neat way to use a tough spall. :)
Zuma
If you are a good detective the past is at your feet. The future belongs to Faith.

Stringman

  • Guest
Re: Succession knife blade
« Reply #4 on: August 17, 2014, 09:50:19 am »
Nice blade! That looks like the stuff I got from Paul. Knaps real good after heated !

Offline flungonin

  • Member
  • Posts: 302
Re: Succession knife blade
« Reply #5 on: August 20, 2014, 10:41:09 pm »
 From what you started with, then ended up with, very nice. Do you know from holding the spaull what you want to end up with? I try to thin all around the edges and end up with bird points. Guess lack of imagination.

Offline cowboy

  • Member
  • Posts: 7,035
  • Paul Wolfe. Springtown, TX
Re: Succession knife blade
« Reply #6 on: August 21, 2014, 08:16:25 pm »
OOOOOOH your makin me wanna dig into my pile of perd squatch! Looks like you got all the good outa that one...
When you come upon a track or trail you do not know, follow it to the point of knowing.