« previous next »
Pages: [1]

Author Topic: heat treating  (Read 1494 times)

0 Members and 1 Guest are viewing this topic.

Offline tattoo dave

  • Member
  • Posts: 1,545
  • Rockford, MI
heat treating
« on: August 01, 2014, 09:46:45 pm »
So, just wondering...seems like at one time I read that heat treating tends to up the poundage a little. Wondering if I recalled that correctly or not. I've never attempted heat treating. I have a red elm bow that is about 5#s shy of what i need. Can't pike it, cause then it'll be too short to hit the draw length I need.

Tattoo Dave
Logged
Rockford, MI

Offline autologus

  • Member
  • Posts: 1,092
Re: heat treating
« Reply #1 on: August 01, 2014, 09:49:25 pm »
Heat treating it could very well get your 5#s.

Grady
Logged
Proud Hillbilly from Arkansas.

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: heat treating
« Reply #2 on: August 01, 2014, 10:27:24 pm »
Heat in some reflex and scorch the belly good and if you can flip the tips a bit you might gain 5# to 10# with these measures. Elm lends itself well to heat treating.
« Last Edit: August 01, 2014, 11:35:54 pm by Pat B »
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline tattoo dave

  • Member
  • Posts: 1,545
  • Rockford, MI
Re: heat treating
« Reply #3 on: August 01, 2014, 10:31:51 pm »
Already flipped the tips. will do some heating in the morning. Thanks fellas.

Dave
Logged
Rockford, MI

Offline JW_Halverson

  • Member
  • Posts: 11,923
Re: heat treating
« Reply #4 on: August 01, 2014, 10:46:26 pm »
Slow and steady, heating 6-8 inches at a time, slowly darkening the wood to a dark toast color.

It will change the tiller and I bet you get your 5 lbs easy.
Logged
Guns have triggers. Bicycles have wheels. Trees and bows have wooden limbs.
Pages: [1]
« previous next »