Author Topic: Bow layout on a stave thats wider on one end than the other  (Read 1414 times)

0 Members and 1 Guest are viewing this topic.

Offline Chris6114

  • Member
  • Posts: 1
Bow layout on a stave thats wider on one end than the other
« on: December 30, 2018, 09:23:08 pm »
  I might be overthinking this one buy i have some staves split following the graing on each side that are around 2 inches wider on one end than the other. How can i lay a bow out without running across the grain

Offline DC

  • Member
  • Posts: 10,396
Re: Bow layout on a stave thats wider on one end than the other
« Reply #1 on: December 30, 2018, 10:00:04 pm »
Probably right down the middle. Limbs are tapered so you are going to cut across the grain eventually.

Offline Dances with squirrels

  • Member
  • Posts: 1,222
Re: Bow layout on a stave thats wider on one end than the other
« Reply #2 on: December 31, 2018, 01:13:15 am »
Yep, over thinking it. If it's a straight grained stave, you can lay it out off of a straight centerline. If the grain is crooked or snakey, lay a string end to end, orient the handle under the string, then remove the string and follow the grain with a pencil from the center of the handle outward toward each end of the stave. Layout the limb widths off of that pencil line.
Straight wood may make a better bow, but crooked wood makes a better bowyer

Offline George Tsoukalas

  • Member
  • Posts: 9,425
    • Traditional and Primitive Archers
Re: Bow layout on a stave thats wider on one end than the other
« Reply #3 on: December 31, 2018, 06:04:03 am »
Set Happens!
If you ain't breakin' you ain't makin!