« previous next »
Pages: [1]

Author Topic: Bbi  (Read 2455 times)

0 Members and 1 Guest are viewing this topic.

Offline Blaflair2

  • Member
  • Posts: 2,042
Bbi
« on: June 19, 2014, 01:59:16 pm »
I have decided to mess with some of the boo I have. I have a 61" ipe board. So I fired why not. I plan on gluing my maple taper lams then the boo. My question is, is a 28" draw doable with a stiff handle or should I go bendy?
Logged
Nothing ventured nothing gained

Offline Badger

  • Member
  • Posts: 8,124
Re: Bbi
« Reply #1 on: June 19, 2014, 02:05:45 pm »
  You can do it with a stiff handle, just be careful you don't have your lams too thick or you will run out of ipe on the belly once you start tillering.
Logged

Offline Blaflair2

  • Member
  • Posts: 2,042
Re: Bbi
« Reply #2 on: June 19, 2014, 02:17:52 pm »
The ipe is 3/8" the maple go from 1/8"-1/16" and the boo I'll taper from 1/8"-1/16" between nodes
Logged
Nothing ventured nothing gained

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: Bbi
« Reply #3 on: June 19, 2014, 02:37:23 pm »
1 1/16" wide max Bruiser, or you will run out of ipe as Steve mentioned.
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline Badger

  • Member
  • Posts: 8,124
Re: Bbi
« Reply #4 on: June 19, 2014, 02:38:46 pm »
  You should be ok.
Logged

Offline Blaflair2

  • Member
  • Posts: 2,042
Re: Bbi
« Reply #5 on: June 19, 2014, 02:59:47 pm »
This is all in the brain storming phase. I appreciate the input
Logged
Nothing ventured nothing gained
Pages: [1]
« previous next »