Author Topic: steam or not to steam  (Read 1943 times)

0 Members and 1 Guest are viewing this topic.

Offline Stixnstones

  • Member
  • Posts: 1,695
steam or not to steam
« on: May 25, 2014, 01:07:43 pm »
got a twisty n bendy piece of osage but nice character , both tips bend the same direction and propeller, thinkin of steamin the whole thing and put in a caul, but want to keep some character
DevilsBeachSelfbows

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: steam or not to steam
« Reply #1 on: May 25, 2014, 02:32:07 pm »
Osage manipulates well with dry heat. I'd start by clamping the handle area to the form well and work out each limb with a heat gun and clamps. Sometimes you have to add wedges with the clamps to work out the twists. Once you get one limb done, work on the other one and let the whole thing cool overnight. You can temper the belly a bit too while you are straightening each limb.
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Stixnstones

  • Member
  • Posts: 1,695
Re: steam or not to steam
« Reply #2 on: May 25, 2014, 02:57:23 pm »
thanx pat will give er a try
DevilsBeachSelfbows