Author Topic: Short ASH working recurve (pic heavy)  (Read 7462 times)

0 Members and 1 Guest are viewing this topic.

Offline Dan K

  • Member
  • Posts: 405
  • 58#@28"
Re: Short ASH working recurve (pic heavy)
« Reply #30 on: May 02, 2014, 10:54:19 am »
Nice profile. Looks like your getting every thing out of this baby!  Did it take any set?
Excellence is a state of mind.  Whether you think you can or can't...you're right!

Offline IdahoMatt

  • Member
  • Posts: 2,093
Re: Short ASH working recurve (pic heavy)
« Reply #31 on: May 02, 2014, 11:57:19 am »
Yes Don it did.  After shooting first unstrung it is 1" under the handle and 1/2" on the tips.  I'm sure how to measure it on these bows but I put the bow belly to the wall and measure under the handle.  Then put the back against the wall and measured the distance the tips were off the wall.   After resting about an hour it goes back to about even (tips to handle). Thanks for the nice words Dan :)
« Last Edit: May 02, 2014, 12:44:22 pm by IdahoMatt »

Offline Traxx

  • Member
  • Posts: 1,018
Re: Short ASH working recurve (pic heavy)
« Reply #32 on: May 02, 2014, 01:56:27 pm »
Hey now!!!
Howd i miss thisn.
Pretty snazy!!

Offline sprat

  • Member
  • Posts: 1
Re: Short ASH working recurve (pic heavy)
« Reply #33 on: May 07, 2014, 09:23:00 pm »
Good job on the bow we will have to get together
And see how well you can shoot it.

Offline IdahoMatt

  • Member
  • Posts: 2,093
Re: Short ASH working recurve (pic heavy)
« Reply #34 on: May 08, 2014, 10:12:51 am »
We will indeed Johnny.  Glad you finally got on PA.  Welcome.