Need a little tiller help

[Juniper]

This bow is 64" tip to tip, red oak board, backed with sinew and rawhide.  Tried to leave the last 6.5" of the limbs a little stiff.  Does the bend look ok?  By my measurements the right limb is a little stiffer than the left (1/8").  I think I have it out to brace height in the pic.  Would appreciate any advise before actually putting the short string on it and proceeding.  Thanks!

[attachment deleted by admin]

[Justin Snyder]

Look pretty good to me.  Might be a little stiffer on the first 2-3 inches of the fades on the right limb, but it is minor if it is.  Maybe if you painted a grid on that wall behind it you could see how its bending a little easier.    Don't tell your wife I said to do it though.  Justin

[Juniper]

Thanks for the help Justin.  May take me a while to convince her on that one.

[DanaM]

What Justin said but the right limb looks a bit stiff at the mid point also. Ya paint a grid
use a sharpie so she can't wash it off

[George Tsoukalas]

Looks ready to be string. Jawge