« previous next »
Pages: 1 [2]

Author Topic: Harvesting Pine Pitch  (Read 15302 times)

0 Members and 1 Guest are viewing this topic.

Offline Gus

  • Member
  • Posts: 1,829
  • It's Time To Make Some Shavings!
Re: Harvesting Pine Pitch
« Reply #15 on: May 07, 2014, 03:44:32 pm »
Kool Thread...
And Timely Too...

As we have moved, well mostly, up to the edge of the Woodlands where the Pine Forest begins in earnest.
Started gathering Sap Nodules off the trees a couple days ago.
Hopefully it won't be too long before I'm ready to try making my first batch of Pitch Glue.

Regards,

-gus
Logged
"I taught him archery everyday, and when he got good at it he throw an arrow at me."

Conroe, TX

Offline RedBear1313

  • Member
  • Posts: 105
Re: Harvesting Pine Pitch
« Reply #16 on: May 08, 2014, 12:06:06 pm »
haven't tried this way yet so not sure how I would feel just burning it, but a quick way.

http://www.youtube.com/watch?v=lYhKhwTVePI
Logged
Hold on to what you can't remember, make sense of what you can't decipher.

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Harvesting Pine Pitch
« Reply #17 on: May 08, 2014, 01:41:37 pm »
I like to start with hard, brittle pitch and add bees wax to make it less brittle and add finely ground charcoal or fine saw dust to add body. If you start with sticky pitch your glue will be sticky. If you only have sticky or gooey pitch cook off the turps until it cools hard and brittle. Be careful cooking pitch because it is very volatile and can combust when too much heat is used. 
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC
Pages: 1 [2]
« previous next »