Congratulations to adb for winning Backed BOM for February with his Room Tempurature Recurve!!
http://www.primitivearcher.com/smf/index.php/topic,45473.0.htmlHere is what adb had to say: Sorry about the multiple topics for this bow, but it's been quite a journey. After two unsuccessful attempts, I finally put this baby to bed. It's off to it's new home tomorrow morning, so I'd better post some pics! This bow, and it's design, has really tested my skill. I believe it has definitely made me a better bowyer. OK... enough chit-chat... here's the goods:
62" NTN, 45#@27", maple backed ipe static recurve. The static recurves are not heat induced (hence the name), but cut one-piece from stock and then glued to the top of the belly lamination with a horizontal kerf splice, with the maple backing overlapping the taper to the belly of the recurved tip.
Maple, yew and ipe in the grip and riser, with the static tips cut from hickory with osage tip overlays.
It's still winter here... -20C this morning, with lots of snow... sorry no outside shots at full draw.
I have never been as frustrated and proud of a single bow in my whole life! This was definitely outside the box for me, and in 10 years of bow making, I've never felt more relieved to finish a bow!
Here are what some forum members had to say about:
ahh the proud papa and you should be that is a sweet bow and quite the adventure to get her to completion, nice bend, bub
That's a looker, Adam. That is a bow to be proud of. Mullet
Nice job, by the way I enjoy all the chit chat and the story that goes with any bow. I guess I need to try my curves that way some time soon. Badger
That's one heck of a nice bow right there! I bet it shoots like a dream. Will H
I like this bow very much. I like especially the unique way you fashioned the static curves. Gordon
VERY nice work! The fit and finish of that bow is great. I appreciate your attention to detail, and the full draw looks great. 4est Trekker
