Author Topic: Bing Cherry tree  (Read 1484 times)

0 Members and 1 Guest are viewing this topic.

Offline wizardgoat

  • Member
  • Posts: 2,397
Bing Cherry tree
« on: February 27, 2014, 02:59:27 pm »
I got permission to cut a decent size bing cherry tree, but can't find much
info on if it's a decent bow wood. I can only find info on black and wild cherry, but have also heard the more wild versions if fruit trees
are better than the sweeter fruit bearing ones.
Anyone?

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Bing Cherry tree
« Reply #1 on: February 27, 2014, 03:02:30 pm »
It would be good enough to try.  ;) Should make a pretty good bow.
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline dwardo

  • Member
  • Posts: 1,456
Re: Bing Cherry tree
« Reply #2 on: February 27, 2014, 04:24:32 pm »
Prunus avium is one of my favourite bow woods. Problem is usually finding a clean long enough section. Cherry tends to have radial branches so knots every foot or so. It likes to be clean, knot free with a clean back.

Offline wizardgoat

  • Member
  • Posts: 2,397
Re: Bing Cherry tree
« Reply #3 on: February 28, 2014, 02:47:33 am »
thanks guys!

Offline burn em up chuck

  • Member
  • Posts: 718
Re: Bing Cherry tree
« Reply #4 on: February 28, 2014, 11:23:48 am »
    the rule of thumb that i heard since i started this, is if it makes a fruit or a nut it should make a bow. that being said i haven't
 tried it yet.

                                                                                                                 chuck
Honored to say I'm a Member of the
         
                 Twin Oaks Bowhunters club