« previous next »
Pages: 1 ... 45 46 [47] 48 49 ... 78

Author Topic: 2014 bow trade works in progress  (Read 244795 times)

0 Members and 2 Guests are viewing this topic.

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,637
Re: 2014 bow trade works in progress
« Reply #690 on: April 05, 2014, 01:24:31 pm »
If you are sure the sinew is dry put a thin coat of TBIII over the sinew and let it dry over night then glue the rawhide down. The initial sizing coat o TB will act as a vapor barrier so more moisture won't get into the sinew/glue/wood.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline DuBois

  • Member
  • Posts: 2,020
Re: 2014 bow trade works in progress
« Reply #691 on: April 05, 2014, 01:30:51 pm »
I just looked back over the posts and I put it on march 8. Its been real dry here still so it should be good.
Thanks Pat, will proceed with hide this week after a little more scraping.
Logged

Offline BOWMAN53

  • Member
  • Posts: 2,238
Re: 2014 bow trade works in progress
« Reply #692 on: April 08, 2014, 10:57:21 am »
Well this is what a got done do far. White oak.
Logged

Offline koan

  • Member
  • Posts: 2,393
  • Brian D. Mo.
Re: 2014 bow trade works in progress
« Reply #693 on: April 08, 2014, 11:19:50 am »
Thats alot of character for white oak..oughta make a sweet bow.... Brian
Logged
When you complement a lady on her dress.....make sure she is the one wearing it.....

Offline BOWMAN53

  • Member
  • Posts: 2,238
Re: 2014 bow trade works in progress
« Reply #694 on: April 08, 2014, 11:26:23 am »
It's from a branch, that's why there's so much character. It's got a butt load of reflex, 7" 
Logged

Offline 4dog

  • Member
  • Posts: 1,610
Re: 2014 bow trade works in progress
« Reply #695 on: April 08, 2014, 11:33:47 am »
zactly how muchIS a buttload..curious?.
Logged
"SET" is always there !!!

Offline BOWMAN53

  • Member
  • Posts: 2,238
Re: 2014 bow trade works in progress
« Reply #696 on: April 08, 2014, 11:36:45 am »
Anything more that 5" is a butt load lol. IMO
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,637
Re: 2014 bow trade works in progress
« Reply #697 on: April 08, 2014, 11:43:50 am »
Jordan, be sure you set the bow up so you separate the tension wood from the compression wood. One side will be thicker rings than the other. Mixing the two can cause tillering problems.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: 2014 bow trade works in progress
« Reply #698 on: April 08, 2014, 11:46:16 am »
Im no WO expert, but I do know a bit about reflex. Id suggest a nice temper and all the while remove 4-5" of that reflex. I don't feel WO will allow that kind of belly compression.
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline BOWMAN53

  • Member
  • Posts: 2,238
Re: 2014 bow trade works in progress
« Reply #699 on: April 08, 2014, 11:46:53 am »
What do you mean by mixing the two?
Logged

Offline BOWMAN53

  • Member
  • Posts: 2,238
Re: 2014 bow trade works in progress
« Reply #700 on: April 08, 2014, 11:52:41 am »
Quote from: PEARL DRUMS on April 08, 2014, 11:46:16 am
Im no WO expert, but I do know a bit about reflex. Id suggest a nice temper and all the while remove 4-5" of that reflex. I don't feel WO will allow that kind of belly compression.

Agreed, If wo compares to hickory and I know hick pretty well it won't handle this much reflex. It's about 1 1/2" thick right now so i can take it out when i get it thinned down.
« Last Edit: April 08, 2014, 12:31:46 pm by BOWMAN53 »
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,637
Re: 2014 bow trade works in progress
« Reply #701 on: April 08, 2014, 11:55:59 am »
Don't have both thin and thicker rings in the same limb if you can help it.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline BOWMAN53

  • Member
  • Posts: 2,238
Re: 2014 bow trade works in progress
« Reply #702 on: April 08, 2014, 12:03:53 pm »
Quote from: Pat B on April 08, 2014, 11:55:59 am
Don't have both thin and thicker rings in the same limb if you can help it.

Oh ok, that shouldn't be a problem.
Logged

Offline Fred Arnold

  • Member
  • Posts: 1,566
  • From up on Munson Creek
Re: 2014 bow trade works in progress
« Reply #703 on: April 08, 2014, 12:45:40 pm »
Pat, do you find that thin/thick rings in the same limb pertain to all bow woods?
Logged
I found many years ago that it is much easier and more rewarding working with those that don't know anything than those that know it all.

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,637
Re: 2014 bow trade works in progress
« Reply #704 on: April 08, 2014, 02:37:57 pm »
Fred, most trees have a tension and a compression side and all limbs do. Dean Torges give a good explanation of this in the first chapter of his book, "Hunting The Osage Bow"
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC
Pages: 1 ... 45 46 [47] 48 49 ... 78
« previous next »