Author Topic: ultimate reflex warbow  (Read 4189 times)

0 Members and 1 Guest are viewing this topic.

Offline Lukasz Nawalny

  • Member
  • Posts: 233
  • Lukasz Nawalny
    • Camelot bows
ultimate reflex warbow
« on: October 02, 2013, 03:07:53 pm »
I had yew stave not best quality, a lot of small knots, bad colour on sapwood. I make relfex wit hot steam , paint ugly back and give thin sinew backing. Stave dry about year in reflex. Last week I work on this stave. Unexpecting results - bow keep big reflex - about  1 minut in full draw, after unstringing 2 inch reflex , few minuts in rest about 3 inch reflex. 115 lb at 30" , 75" NTN , crazy string tension. Shame that it is too strong for me. I expect see it in action on polish flight championship in next year, I think few records could be broken
http://www.fotosik.pl/u/robinn/zdjecie/1/album/1512686

Offline toomanyknots

  • Member
  • Posts: 3,132
Re: ultimate reflex warbow
« Reply #1 on: October 02, 2013, 04:52:45 pm »
Awesome!
"The way of heaven is like the bending of a bow-
 the upper part is pressed down,
 the lower part is raised up,
 the part that has too much is reduced,
 the part that has too little is increased."

- Tao Te Ching, 77, A new translation by Victor H. Mair

Offline JW_Halverson

  • Member
  • Posts: 11,923
Re: ultimate reflex warbow
« Reply #2 on: October 02, 2013, 09:53:24 pm »
I think many people start bending on their sinew too early, not letting it cure fully before putting it to the test.  A year of curing never caused a bow to fail!  She's a beauty, Lukasz. 

Always love to see your work!  Let us know how she shoots next year at the flight competition!
Guns have triggers. Bicycles have wheels. Trees and bows have wooden limbs.

Offline adb

  • Member
  • Posts: 5,339
Re: ultimate reflex warbow
« Reply #3 on: October 03, 2013, 12:40:39 pm »
Very cool! A sinew backed warbow! Did you have any trouble tillering it? I had a big problem with lateral stability on a reflexed warbow stave. It continuously wanted to roll over at low brace.

Offline toomanyknots

  • Member
  • Posts: 3,132
Re: ultimate reflex warbow
« Reply #4 on: October 03, 2013, 04:58:15 pm »
Very cool! A sinew backed warbow! Did you have any trouble tillering it? I had a big problem with lateral stability on a reflexed warbow stave. It continuously wanted to roll over at low brace.

I get the same thing. I just don't low brace it. I longstring tiller the stave in front of a big long mirror (as it would not work on a tiller tree) until I am satisfied a full 6" brace would be possible, and then brace it and go from there. That's how I handle that problem at least.
"The way of heaven is like the bending of a bow-
 the upper part is pressed down,
 the lower part is raised up,
 the part that has too much is reduced,
 the part that has too little is increased."

- Tao Te Ching, 77, A new translation by Victor H. Mair

Offline Lukasz Nawalny

  • Member
  • Posts: 233
  • Lukasz Nawalny
    • Camelot bows
Re: ultimate reflex warbow
« Reply #5 on: October 03, 2013, 06:16:29 pm »
Yes I had problems with twisting limbs and made a lot of corrects with heating gun. Now is ok with 6 inch BH.

Offline stickbender

  • Member
  • Posts: 3,828
Re: ultimate reflex warbow
« Reply #6 on: October 29, 2013, 05:23:15 pm »

     Absolutely beautiful! 8)  You certainly are the artisan with your bows!  ;) You have achieved some miraculous bends in that wood! :o That would be a bow an Elf would be proud to carry! ;D
that should send the Orcs out of the area! ;) ;D ;D  Beautiful work!

                                                             Wayne

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,911
  • Eddie Parker
Re: ultimate reflex warbow
« Reply #7 on: November 05, 2013, 04:52:45 pm »
Lukasz;

 I always enjoy seeing your bows, that one is a beauty. And, I think I could probably pull it back.
Lakeland, Florida
 If you have to pull the trigger, is it really archery?