« previous next »
Pages: [1]

Author Topic: Maple sapling  (Read 1100 times)

0 Members and 1 Guest are viewing this topic.

Offline b-dog

  • Member
  • Posts: 7
Maple sapling
« on: October 05, 2013, 11:14:57 pm »
The other day I cut a maple sapling. I is about 3" on the big end down to about 2" . I can probably get 68" out of it. What would be a good design for a stave like this. I have made a few board bows and 1 hickory stave bow but that is about all.
    Thanks. B-dog
Logged

Offline huisme

  • Member
  • Posts: 1,036
  • I'm Marc, but not that Marc.
Re: Maple sapling
« Reply #1 on: October 05, 2013, 11:48:11 pm »
It's tension wood, so the crown on that should help. It'll make any flat style from flatbows to mollegabets.
Logged
50#@26"
Black locust. Black locust everywhere.
Mollegabets all day long.
Might as well make them short, save some wood to keep warm.
Pages: [1]
« previous next »