« previous next »
Pages: [1]

Author Topic: Screw-in Takedown?  (Read 1294 times)

0 Members and 1 Guest are viewing this topic.

Offline TacticalFate

  • Member
  • Posts: 234
Screw-in Takedown?
« on: September 16, 2013, 02:43:26 pm »
I was wondering if anybody has tried this, same idea as the Bow-Bolt System, but with easily attainable, cheaper hardware. Probably not as bomb-proof as a sleeve, but I was just wondering.

Essentially a threaded insert in one side of the riser, a bolt in the other, and screwing the two pieces together. I'm thinking splitting would be an issue with a natural wood riser, unlike the phelnoic used in f-glass bows.
« Last Edit: September 16, 2013, 02:46:27 pm by TacticalFate »
Logged

Offline bubby

  • Member
  • Posts: 11,054
Re: Screw-in Takedown?
« Reply #1 on: September 16, 2013, 02:53:50 pm »
somebody posted one that he made last year, do a search and see what comes up
Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline Fred Arnold

  • Member
  • Posts: 1,566
  • From up on Munson Creek
Re: Screw-in Takedown?
« Reply #2 on: September 16, 2013, 03:04:14 pm »
I know Jim Davis has done some but not sure of his handle here. He goes by his name on another site. It looks to be a pretty good system and I'm thinking he uses it on 50# bows.
Logged
I found many years ago that it is much easier and more rewarding working with those that don't know anything than those that know it all.
Pages: [1]
« previous next »