« previous next »
Pages: [1]

Author Topic: Thickness of backing  (Read 1266 times)

0 Members and 1 Guest are viewing this topic.

Offline Tiredtim

  • Member
  • Posts: 109
Thickness of backing
« on: August 31, 2013, 09:39:09 pm »
What thickness do most of you use for hickory backing?  1/8th, 1/16th?  I can't seem to get that right.  Thanks guys.
Logged

Offline bow101

  • Member
  • Posts: 2,235
Re: Thickness of backing
« Reply #1 on: August 31, 2013, 09:45:02 pm »
I hear lots use  1/8 th.
Logged
"The privilege of a lifetime is being who you are."  Joseph Campbell

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Thickness of backing
« Reply #2 on: August 31, 2013, 11:50:14 pm »
I cut hickory backing strips at 3/16" and they end up at 1/8" or slightly less after removing the tool marks.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Dances with squirrels

  • Member
  • Posts: 1,222
Re: Thickness of backing
« Reply #3 on: September 01, 2013, 05:25:46 am »
I glued up a hickroy backed osage yesterday and the hickory was .100" thick. When I glue up bows with wood on the belly that is weaker in compression resistance, I make the backing thinner... about 1/16" give or take.
Logged
Straight wood may make a better bow, but crooked wood makes a better bowyer

Offline Tiredtim

  • Member
  • Posts: 109
Re: Thickness of backing
« Reply #4 on: September 01, 2013, 04:10:17 pm »
Thanks guys.  This helps a great deal.
Logged

mikekeswick

  • Guest
Re: Thickness of backing
« Reply #5 on: September 02, 2013, 06:48:55 am »
With my experimention of hickory and ipe i've come to prefer thicker backings. I normally use 6mm hickory backs now.
Bows with thicker backs i've found to hold reflex better than those with 'normal' thickness backs.
Logged
Pages: [1]
« previous next »