Author Topic: simple yew...so far so good?  (Read 2229 times)

0 Members and 1 Guest are viewing this topic.

Offline hammertime

  • Member
  • Posts: 763
  • no shoes no shirt, no problems
simple yew...so far so good?
« on: August 31, 2013, 11:49:25 pm »
Hi all.I am about out to about 22 -23 inches on this yew stick i have been working on this summer.Still plenty of # at around 60,tiller ok?-Thanks for your input-Hammertime

Offline huisme

  • Member
  • Posts: 1,036
  • I'm Marc, but not that Marc.
Re: simple yew...so far so good?
« Reply #1 on: September 01, 2013, 12:05:31 am »
Take my advice with a grain of salt, but it looks like the outermost bit of both limbs could bend just a hair more.
50#@26"
Black locust. Black locust everywhere.
Mollegabets all day long.
Might as well make them short, save some wood to keep warm.

Offline rossfactor

  • Member
  • Posts: 805
  • Humboldt County CA
Re: simple yew...so far so good?
« Reply #2 on: September 01, 2013, 03:40:48 am »
Looks pretty solid to me, classic shape. I think right of the upper fade might use a couple scrapes. Outer thirds seem a hair stiff, but its nearly impossible to judge a tiller without seeing the unbraced profile as well.

Gabe
Humboldt County CA.

Offline Dances with squirrels

  • Member
  • Posts: 1,222
Re: simple yew...so far so good?
« Reply #3 on: September 01, 2013, 05:30:02 am »
Exactly. I don't offer tillering advice without first studying the unbraced profile.... and I wouldn't want anyone offering advice to me if they hadn't done likewise.
Straight wood may make a better bow, but crooked wood makes a better bowyer

Offline Del the cat

  • Member
  • Posts: 8,322
    • Derek Hutchison Native Wood Self Bows
Re: simple yew...so far so good?
« Reply #4 on: September 01, 2013, 05:37:14 am »
I'm with huisme.
Lookin' good
Del
Health warning, these posts may contain traces of nut.

Offline Bryce

  • Global Moderator
  • Member
  • Posts: 3,125
  • Pacific Ghost Longbows
Re: simple yew...so far so good?
« Reply #5 on: September 01, 2013, 01:09:53 pm »
Looks pretty solid to me, classic shape. I think right of the upper fade might use a couple scrapes. Outer thirds seem a hair stiff, but its nearly impossible to judge a tiller without seeing the unbraced profile as well.

Gabe
+1
Clatskanie, Oregon