Author Topic: Barn beams  (Read 1335 times)

0 Members and 1 Guest are viewing this topic.

Offline Blaflair2

  • Member
  • Posts: 2,042
Barn beams
« on: August 18, 2013, 05:52:12 pm »
So I got thinking. I have these 100yr+ old barn beams sitting in my garage I made a table from. Is it possible to split into staves? Old growth trees. Any ideas?
Nothing ventured nothing gained

Offline sonny

  • Member
  • Posts: 742
Re: Barn beams
« Reply #1 on: August 18, 2013, 05:53:07 pm »
what wood ??
Never argue with an idiot. They'll drag you down to their level and beat you with experience.

Offline Blaflair2

  • Member
  • Posts: 2,042
Re: Barn beams
« Reply #2 on: August 18, 2013, 05:57:39 pm »
Oh duh! Haha. Some are white oak some a red oak. I think I have mainly white left. Really dense heavy stuff
Nothing ventured nothing gained

Offline half eye

  • Member
  • Posts: 3,300
Re: Barn beams
« Reply #3 on: August 18, 2013, 06:15:32 pm »
I've used "cants" before to resaw my quartersawn bows quite a bit. But there is no reason you cannot re-saw then to have flat grain and chase a ring (stave) either way that white oak is gonna make killer bows. As far as I know you will only need to check for powder-post beetles as far as bugs go. Any mold issues should be self evident.

As far as tough goes, the USS Constitution (Old Ironsides) would withstand a 12# and close range, and the hull planks were eastern white oak. 8)
rich

Offline sleek

  • Member
  • Posts: 6,764
Re: Barn beams
« Reply #4 on: August 18, 2013, 08:38:16 pm »
Pics please
Tread softly and carry a bent stick.

Dont seek your happiness through the approval of others