« previous next »
Pages: [1]

Author Topic: Retired billet knife is finished  (Read 1651 times)

0 Members and 1 Guest are viewing this topic.

Offline Ryan_Gill_HuntPrimitive

  • Member
  • Posts: 1,676
Retired billet knife is finished
« on: July 26, 2013, 11:11:42 pm »
Well, I went ahead and made a knife from that retired billet. I decided to do a complete abo knife. I soaked it in water over night and then took about an 2 hours to waller out the notch by hand using only stone tools. I knapped the blade out of FL chert with my new billet, but the stone tools used were all knapped with the retired billet. Took a considerable amount of energy to eat that antler away, but I got it done.  After getting a good tight fit, i heated up some pitch and set it in really tight. I wrapped tight with sinew and let dry.  I decided to coat the sinew with more pitch to waterproof it. I knew if I used hide glue I would battle using the knife on skins or anything wet...so despite not looking as nice, I came away with a totally abo knife, made with all stone age tools and set with out any modern glues. I am surprised at how strong it actually is.  Kinda wishing the lashings were "nicer looking", but I've made a ton of knifes that are modernly made and look great, so this one I wanted totally abo start to finish.
Logged
Formerly "twistedlimbs"
Gill's Primitive Archery and HuntPrimitive

Offline JW_Halverson

  • Member
  • Posts: 11,923
Re: Retired billet knife is finished
« Reply #1 on: July 27, 2013, 12:15:20 am »
Looks like iowabow is going to be presenting you with your ABO Master Badge at the next meeting.

Great way of respecting a tool that has given you so much of itself.  Mucho mojo.
Logged
Guns have triggers. Bicycles have wheels. Trees and bows have wooden limbs.

Offline bubby

  • Member
  • Posts: 11,054
Re: Retired billet knife is finished
« Reply #2 on: July 27, 2013, 01:38:36 am »
You honored that biker instead of retiring it to the scrap heap, did it justice too
Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline cowboy

  • Member
  • Posts: 7,035
  • Paul Wolfe. Springtown, TX
Re: Retired billet knife is finished
« Reply #3 on: July 27, 2013, 05:47:17 am »
Looks good mr Ryan! Hopefully you'll get years of service from that one.
Logged
When you come upon a track or trail you do not know, follow it to the point of knowing.

Offline YosemiteBen

  • Member
  • Posts: 1,952
Re: Retired billet knife is finished
« Reply #4 on: July 27, 2013, 03:49:07 pm »
very nice! you can use a heat gun to glaze over the pitch and leave it shiny if ya want to.
Logged

Offline iowabow

  • member
  • Member
  • Posts: 4,722
Re: Retired billet knife is finished
« Reply #5 on: July 27, 2013, 08:15:28 pm »
JW and I will be sending you something in the mail!
Logged
(:::.) The ABO path is a new frontier to the past!

Offline Ryan_Gill_HuntPrimitive

  • Member
  • Posts: 1,676
Re: Retired billet knife is finished
« Reply #6 on: July 29, 2013, 10:16:00 am »
thanks guys, I appreciate it. the good part about it, when I wear that blade out I can heat it up and insert a new blade.. A hand should last a very long time!
Logged
Formerly "twistedlimbs"
Gill's Primitive Archery and HuntPrimitive

Offline 4dog

  • Member
  • Posts: 1,610
Re: Retired billet knife is finished
« Reply #7 on: July 29, 2013, 10:42:18 am »
Gonna try my Jedi powers,,,,,,,"You dont really need this knife,,,,4dog needs to own this knife,, i think i will send it to him",,( mystical tinkling in background) .

Beautiful work on that knife man!
Logged
"SET" is always there !!!

Offline AncientArcher76

  • Member
  • Posts: 1,113
Re: Retired billet knife is finished
« Reply #8 on: July 31, 2013, 05:45:13 am »
Great job on that and nice looking stone too!


Russ
Logged
Time, dedication, cuts, tons of broken rock, a wife, and perhaps a few girlfriends are some of what it takes in becoming a skilled flint knapper!!!
 
"Ancient Art"  by R. Hill
Pages: [1]
« previous next »