« previous next »
Pages: 1 [2]

Author Topic: Finishes?  (Read 3170 times)

0 Members and 1 Guest are viewing this topic.

Offline DavidV

  • Member
  • Posts: 472
Re: Finishes?
« Reply #15 on: April 28, 2013, 06:25:56 pm »
I started out using spray on polyurethane and deft. Didn't like them very much, especially in satin. I mostly use danish oil now which is a mixture of polyurethane, denatured alchohol, and boiled linseed oil. It's easy to touch up and refinish later if need be.

Massey finish is killer too, pretty much a mixture of epoxy and acetone. The problem is it's harder to touch up if you get a scratch in it.
Logged
Springfield, MO

Offline lostarrow

  • Member
  • Posts: 1,348
Re: Finishes?
« Reply #16 on: April 28, 2013, 06:45:25 pm »
AHHHHHHHHHHH! thanks for clearing that up Weylin!  I use the same technique but with Rottenstone and lamp oil or mineral oil as the lubricant. The Rottenstone is just finer and leaves  more of a gloss. (mostly for cabinets) Be carefull not to breathe that  stuff in .
« Last Edit: April 28, 2013, 07:00:51 pm by lostarrow »
Logged

Offline bow101

  • Member
  • Posts: 2,235
Re: Finishes?
« Reply #17 on: April 28, 2013, 08:53:59 pm »
I have used mineral oil for some time on a lot of other projects. I will dry over time but I seal it with a coat of poly. I know its not primitive but....... ::).  Maybe next time I'll try a coat of mineral oil and finish off with bees wax
Logged
"The privilege of a lifetime is being who you are."  Joseph Campbell

Offline killir duck

  • Member
  • Posts: 747
  • i like elk
Re: Finishes?
« Reply #18 on: April 28, 2013, 10:43:48 pm »
tru-oil
Logged
PRIMITIVE ARCHERY what other way can you play with sticks and rocks all day and not look like a little kid

Every time i shoot at a bunny i recall the wise words of Elmer Fudd "I've got you now you waskally wabbit!"
Pages: 1 [2]
« previous next »