« previous next »
Pages: [1] 2

Author Topic: What handle for this hatchet?  (Read 3742 times)

0 Members and 1 Guest are viewing this topic.

Offline Jodocus

  • Member
  • Posts: 897
What handle for this hatchet?
« on: March 31, 2013, 04:08:59 pm »
I got this hatchet in a trade. Lovely, isn't it? It's originally an old head. I want to make a handle for it, but I'm not sure what it should look like. Anyone know more?

Logged
Don't shoot!

Offline Bitterguy

  • Member
  • Posts: 257
Re: What handle for this hatchet?
« Reply #1 on: March 31, 2013, 04:58:50 pm »
I don't have any expiernces with hatchets, but i think you'd get a better response in the "around the campfire" section
Logged
Repetition is key.
Repetition is key.
Repetition is key.
Repetition is key.
If you're not getting better, you're getting worse.

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: What handle for this hatchet?
« Reply #2 on: March 31, 2013, 05:16:30 pm »
Hickory or ash are traditionally used for tool handles.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline osage outlaw

  • Member
  • Posts: 11,962
Re: What handle for this hatchet?
« Reply #3 on: March 31, 2013, 05:27:00 pm »
I like a gentle flare out on the bottom of the handle. 
Logged
I started out with nothin' and I still got most of it left

Offline Saxton

  • Member
  • Posts: 24
Re: What handle for this hatchet?
« Reply #4 on: March 31, 2013, 10:04:59 pm »
Hop Hornbeam (Ironwood)
Logged

Offline bowtarist

  • Member
  • Posts: 3,503
  • Primitive Archer Subscription Number PM103651
Re: What handle for this hatchet?
« Reply #5 on: March 31, 2013, 11:06:11 pm »
The handle will slip into the head from the bottom,  The handle will need to fit into the head, then become thicker about four or so inches down the handle (Kinda like a backwards hourglass) , then it can tapper again where your hands go, then flare at the bottom like osageoutlaw mentioned.  look @ some other hatchets.  I thinbk that style mostly had straight handles, but I'm not expert.  hit that baby with a wire wheel or some emmery cloth to get all them grind lines off it, though.   :) Nice find, dpg
Logged
(:::.)    Osage music played daily. :)

Offline bubby

  • Member
  • Posts: 11,054
Re: What handle for this hatchet?
« Reply #6 on: April 01, 2013, 01:37:42 am »
i'd use a hard maple with some sweet assed figure, I like the shape on that head
Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline Jodocus

  • Member
  • Posts: 897
Re: What handle for this hatchet?
« Reply #7 on: April 01, 2013, 04:30:25 am »
thanks all. Maybe my question wasn't clear enough. I got some suitable wood (ash, elm, hornbeam, dogwood) and I have already mounted some handles.

What I need to know is what shape the handle should be. Should it bend or be straight? iE do I want the handle at the grip section to be parallel to the edge (wich is not parallel to the eye). That would make for quite some upward bend. And should it bend laterally or not?

That's what I'm unsure about. Angles and bends.
Logged
Don't shoot!

Offline robby

  • Member
  • Posts: 116
Re: What handle for this hatchet?
« Reply #8 on: April 01, 2013, 11:02:18 am »
Because of the shape of the head and hole configuration, I would go with a handle commonly found on a hatchet or axe, as opposed to a hawk or straight handle.
https://www.google.com/search?q=hatchet+handles&hl=en&client=firefox-a&hs=lt0&rls=org.mozilla:en-US:official&tbm=isch&tbo=u&source=univ&sa=X&ei=-ItZUemdKIXH4APAn4HQBw&ved=0CHEQsAQ&biw=1051&bih=648
Robby
Logged

Offline Gus

  • Member
  • Posts: 1,829
  • It's Time To Make Some Shavings!
Re: What handle for this hatchet?
« Reply #9 on: April 01, 2013, 10:42:56 pm »
Osage...

 :)

-gus
Logged
"I taught him archery everyday, and when he got good at it he throw an arrow at me."

Conroe, TX

Offline robtattoo

  • Member
  • Posts: 19
Re: What handle for this hatchet?
« Reply #10 on: April 03, 2013, 03:53:24 am »
Well, seeing as it's a single-bevel carpenter's axe, I'd go with a traditional carving handle shape (the middle one in this image)

Logged
Veni, Vidi, Velcro. (I came, I saw, I stuck around)

Offline Jodocus

  • Member
  • Posts: 897
Re: What handle for this hatchet?
« Reply #11 on: April 03, 2013, 12:04:27 pm »
Hah, that thing in the middle looks about like my hatchet! I have already made it a handle that looks more like the one on top, though. I'll try it out and make one like this too. I'll let you look and know about the results. Thanks everyone for the much appreciated advice.

Logged
Don't shoot!

Offline Jodocus

  • Member
  • Posts: 897
Re: What handle for this hatchet?
« Reply #12 on: April 03, 2013, 06:30:10 pm »
Thats what I made, it's from an old piece of wych elm with some bug holes, too. I'm going to sharpen and test it as soon as I can, but from the way it swings it should work fine.
Logged
Don't shoot!

Offline robtattoo

  • Member
  • Posts: 19
Re: What handle for this hatchet?
« Reply #13 on: April 03, 2013, 09:57:46 pm »
Very nice!
Logged
Veni, Vidi, Velcro. (I came, I saw, I stuck around)

Offline Pappy

  • Global Moderator
  • Member
  • Posts: 32,204
  • if you have to ask you wouldn't understand ,Tenn.
Re: What handle for this hatchet?
« Reply #14 on: April 04, 2013, 09:21:57 am »
Very nice work,looks like and old roofers ax.  :) Love it,I have a newer version but would love to run across and old one like that. :)
   Pappy
Logged
Clarksville,Tennessee
TwinOaks Bowhunters
Life is Good
Pages: [1] 2
« previous next »