Thinking the tiller was 'Good nuff' or thinking the back of a bow was "Clean nuff".
I had a 48" hickory self bow I was drawing 24" and I still remember that one blowing up and the limb flying right by my face.

Also when I first started, the only things I knew about archer came from looking at FG bows and reading "Hunting with the Bow and Arrow". Well, I really skimmed the book and all I rememberd was that Ishi's bow was measured from hip to outstreched arm. Then Fiberglass bows were about an inch wide and had a stiff thick handle with a notch for the arrow.
My first couple bows when I was younger were made with this 46" 1" wide stiff riser, 1 hickory, 1 boo backed maple. By short drawing, one of them actually worked (the hickory), and after wrapping a couple of the back splinters with electrical tape, I had a bow that drew about 60lbs at 20" and it worked well for several months untill I made my next bows. I still have it today and it is unbroken, reminding me of where I came from a few years ago.
Hickory was good to me starting out and I still use it today.
