Author Topic: what fletching style do you use?  (Read 3056 times)

0 Members and 1 Guest are viewing this topic.

Offline Newindian

  • Member
  • Posts: 734
what fletching style do you use?
« on: March 17, 2013, 01:36:37 am »
Strait, helical, off set? And while we're at it do you hand fletch or use a jig
I like free stuff.

Offline crooketarrow

  • Member
  • Posts: 2,790
Re: what fletching style do you use?
« Reply #1 on: March 17, 2013, 10:52:38 am »
 I use 5",1/2" helical right wing mostly turkey and geese.
 I mainly use a jig for myself but hand fleatch for other people if they want.
DEAD IS DEAD NO MATTER HOW FAST YOUR ARROW GETS THERE
20 YEARS OF DOING 20 YEARS OF LEARNING 20 YEARS OF TEACHING

Offline Scowler

  • Member
  • Posts: 611
Re: what fletching style do you use?
« Reply #2 on: March 17, 2013, 11:41:39 am »
I've a 4 1/4" left wing helical, mostly turkey and some geese.  Normally use a fletching jig but have done tied on only.  Although the fletchings are 4 1/4" long I trim 3/8" off the front and back to allow for artificial or real sinew wrappings, so the working fletching area is 3 1/2". 

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: what fletching style do you use?
« Reply #3 on: March 17, 2013, 11:54:56 am »
My fletching jig(JoJan Multifletch) is a straight fletcher. Depending on whether I'm using right or left wing I slightly offset the fletching either right or left. I also hand fletch with traditional 3 fletch, Eastern Woodland 2 fletch and tangential 3fletch.
 When I buy prechopped fletching I use 5 1/2" shield cut but when I go from scratch I burn fletching with my own design.
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Frawg

  • Member
  • Posts: 282
  • Mayan Apocalypse Survivor
    • N/A
Re: what fletching style do you use?
« Reply #4 on: March 17, 2013, 12:38:15 pm »
Eastern Woodland 2 fletch.
Matt
Matt Bradley

Glade Valley, NC

Offline H Rhodes

  • Member
  • Posts: 2,172
Re: what fletching style do you use?
« Reply #5 on: March 18, 2013, 09:59:38 am »
I have come to prefer two fletch arrows.  I get more arrows from each turkey wing and I can't tell the difference in the accuracy. 
Howard
Gautier, Mississippi

Offline sadiejane

  • Member
  • Posts: 1,030
Re: what fletching style do you use?
« Reply #6 on: March 18, 2013, 11:30:14 am »
I have come to prefer two fletch arrows.  I get more arrows from each turkey wing and I can't tell the difference in the accuracy.

yup, pretty much do all my own arrows two fletch these days.
have found nothing about how they fly to do it any.
wild women don't get the blues

Offline bowtarist

  • Member
  • Posts: 3,503
  • Primitive Archer Subscription Number PM103651
Re: what fletching style do you use?
« Reply #7 on: March 18, 2013, 12:06:49 pm »
I like a two fletch, but have a 5 1/2" shield cut chopper for when I get full length feathers.  all most always helical or off set whether I'm using a jig or not.  I've even fletched some two feather with a jig set up to do 90* 4 fletch.  have fun, dpg
(:::.)    Osage music played daily. :)

Offline Prarie Bowyer

  • Member
  • Posts: 1,599
Re: what fletching style do you use?
« Reply #8 on: March 18, 2013, 02:28:13 pm »
Straight fletch with a self made jig. Or by hand and give it a little helical.

Offline Thesquirrelslinger

  • Member
  • Posts: 1,245
Re: what fletching style do you use?
« Reply #9 on: March 18, 2013, 04:49:33 pm »
I prefer to use a slightly helical two sided- Diagram below.
I do not like the velocity loss, but I do like accuracy. a fast shaft will not help anything if you cannot hit stuff, and with a 50 pound recurve, I really do not mind small velocity loss. Plus, I do not hunt.
-Squirrel
"Insanity is doing the same thing over and over again and expecting different results"