« previous next »
Pages: [1]

Author Topic: First knife handle  (Read 2302 times)

0 Members and 1 Guest are viewing this topic.

Offline WarBird

  • Member
  • Posts: 37
First knife handle
« on: March 13, 2013, 07:19:33 pm »
Well it's nothing fancy but still turned out nice I think. This was a blade I had gotten free as an RMEF member and it had no real handle, just the metal so I decided to practice the handle making on it as I am not ready to make my own blades quite yet.
Logged

Offline Cardboard_Duck

  • Member
  • Posts: 282
  • Winter Haven, FL
Re: First knife handle
« Reply #1 on: March 13, 2013, 07:41:24 pm »
I like it! What kind of wood is that?
Logged
>>>---------->

Offline WarBird

  • Member
  • Posts: 37
Re: First knife handle
« Reply #2 on: March 13, 2013, 07:48:21 pm »
It's Poplar with a dark walnut and pecan mix stain
Logged

Offline Frawg

  • Member
  • Posts: 282
  • Mayan Apocalypse Survivor
    • N/A
Re: First knife handle
« Reply #3 on: March 14, 2013, 02:16:00 am »
looks good
Matt
Logged
Matt Bradley

Glade Valley, NC

Offline Pappy

  • Global Moderator
  • Member
  • Posts: 32,198
  • if you have to ask you wouldn't understand ,Tenn.
Re: First knife handle
« Reply #4 on: March 14, 2013, 06:18:43 am »
Beautiful wood,did you just glue it on ? I don't see any pins. :)
  Pappy
Logged
Clarksville,Tennessee
TwinOaks Bowhunters
Life is Good

Offline WarBird

  • Member
  • Posts: 37
Re: First knife handle
« Reply #5 on: March 14, 2013, 01:25:30 pm »
Yeah, I used a 2 part epoxy, the pic below shows what it looked like before so I couldn't really do pins.
Logged

Offline Pappy

  • Global Moderator
  • Member
  • Posts: 32,198
  • if you have to ask you wouldn't understand ,Tenn.
Re: First knife handle
« Reply #6 on: March 15, 2013, 06:09:35 am »
O I see. I have just had trouble with doing that,they always seem to pop of down the road.Hope you have better luck.Very nice looking knife by the way. :)
   Pappy
Logged
Clarksville,Tennessee
TwinOaks Bowhunters
Life is Good

Offline bowtarist

  • Member
  • Posts: 3,503
  • Primitive Archer Subscription Number PM103651
Re: First knife handle
« Reply #7 on: March 15, 2013, 09:51:30 am »
Looks pretty good.  You could still go back and pin it with 1/8" brazing rod (that's what I use), even though it wouldn't hold the blade due to the large hadle hole, it might help keep the scales on.  Carful drilling through the bottom scale, watch that you don't punch a big sliver out when you come through it.  Put another piece of wood under it.  Again, looks good, dpg
Logged
(:::.)    Osage music played daily. :)

Offline WarBird

  • Member
  • Posts: 37
Re: First knife handle
« Reply #8 on: March 15, 2013, 10:28:25 pm »
Thanks guys, I might try and put a pin in if for no other reason than learning how it's done.
Logged
Pages: [1]
« previous next »