« previous next »
Pages: [1]

Author Topic: Growth Rings  (Read 1470 times)

0 Members and 1 Guest are viewing this topic.

Offline bow101

  • Member
  • Posts: 2,235
Growth Rings
« on: March 04, 2013, 04:50:46 pm »
Cut a few Hawthorn trunks from 3-4 inches round.  The late growth rings from the pith out are tight where as the early growth are kind of big.   THe cluster of trees is sitting in a tiny ditch area, I know there would be fast growth issues with that much water. Cut a few sapplings and they are great; nice tight rings. Sorry don't have any pics.  Will these make any kind of a bow.?....... :-\ :-\
« Last Edit: March 04, 2013, 04:58:42 pm by bow101 »
Logged
"The privilege of a lifetime is being who you are."  Joseph Campbell

Offline bushboy

  • Member
  • Posts: 2,256
Re: Growth Rings
« Reply #1 on: March 04, 2013, 05:21:42 pm »
I may be wrong but if it's diffuse porous that would make sense!it's like maple and popular with large early wOod rings and small late wood.am going by memory so again I could be wrong.
Logged
Some like motorboats,I like kayaks,some like guns,I like bows,but not the wheelie type.

Offline DarkSoul

  • Member
  • Posts: 1,315
    • Orion Bows
Re: Growth Rings
« Reply #2 on: March 04, 2013, 06:14:28 pm »
Hawthorn is indeed diffuse porous. Fat rings or tight rings shouldn't really matter; either will make a fine bow.
Logged
"Sonuit contento nervus ab arcu."
Ovid, Metamorphoses VI-286

Offline bow101

  • Member
  • Posts: 2,235
Re: Growth Rings
« Reply #3 on: March 04, 2013, 08:01:28 pm »
Cheers,  :)   wait a while till dried out...or speed dry some. At any rate gota look around drier areas for some of this stuff.
Logged
"The privilege of a lifetime is being who you are."  Joseph Campbell
Pages: [1]
« previous next »