« previous next »
Pages: 1 ... 110 111 [112] 113 114 ... 151

Author Topic: 2013 Bow Trade Works In Progress  (Read 587440 times)

0 Members and 2 Guests are viewing this topic.

Offline Gaur

  • Member
  • Posts: 460
Re: 2013 Bow Trade Works In Progress
« Reply #1665 on: July 03, 2013, 09:23:24 pm »
thanks JLoranger.  I'm also hoping they turn out and make the intended weight range.  The about cried when I first strung the middle osage bow as there was an area I got a bit too thin and thought all was lost.  But I've got that worked and and then heat treated it and added some recurve so I'm hoping the weight might still make it.  I was a bit too much in a hurry that day and should have been more careful with the scrapper.   The Yew still needs more floor tillering and I'll do that when I get to MN and get out of this frantic moving mode.
Logged
"...He made me a polished arrow and hid me in His quiver." Is 49:2

Offline Pappy

  • Global Moderator
  • Member
  • Posts: 32,207
  • if you have to ask you wouldn't understand ,Tenn.
Re: 2013 Bow Trade Works In Progress
« Reply #1666 on: July 04, 2013, 07:40:01 am »
Beautiful skins you have on them. :) Looking forward to seeing them finished up and all dolled up. :)
   Pappy
Logged
Clarksville,Tennessee
TwinOaks Bowhunters
Life is Good

Offline MWirwicki

  • Member
  • Posts: 2,234
  • The wood speaks to you; Listen with your eyes. GSD
Re: 2013 Bow Trade Works In Progress
« Reply #1667 on: July 04, 2013, 09:05:47 am »
Looking good so far, Randy!  Really cool skins.  Travel safe!
Logged
Matt Wirwicki
Owosso, MI

Offline Gaur

  • Member
  • Posts: 460
Re: 2013 Bow Trade Works In Progress
« Reply #1668 on: July 04, 2013, 11:51:58 am »
Thanks Pappy and Mike.  They are finally drying out after day three.  I have the air con cranking. 
Logged
"...He made me a polished arrow and hid me in His quiver." Is 49:2

Offline autologus

  • Member
  • Posts: 1,092
Re: 2013 Bow Trade Works In Progress
« Reply #1669 on: July 07, 2013, 11:15:24 am »
My trade bow is coming along nicely. I have finishe tillering and im done with the tip overlays. I will be gluing the cherry bark on next so it should be finished soon.

Grady
Logged
Proud Hillbilly from Arkansas.

Offline FlintWalker

  • Member
  • Posts: 2,577
Re: 2013 Bow Trade Works In Progress
« Reply #1670 on: July 07, 2013, 12:21:51 pm »
I put the last coat of finish one her today. Hope to ship it this week :)
Logged
Be thankfull for all you have, because no matter how bad you think it is...it can always be worse.

Offline Elktracker

  • Member
  • Posts: 1,964
  • Josh
Re: 2013 Bow Trade Works In Progress
« Reply #1671 on: July 07, 2013, 03:35:59 pm »
Good looking bows everyone! Been busy so haven't been on here much but I am starting on my fourth coat of tru oil and then handle wrap and I will post some pictures before she goes out. :)

Josh
Logged
my friends think my shops a mess, my wife thinks I have too much bow wood, my neighbors think im redneck white trash and they may all be right on the money!!

Josh Vance  Netarts OR. (Tillamook)

Offline Bryce

  • Global Moderator
  • Member
  • Posts: 3,125
  • Pacific Ghost Longbows
Re: 2013 Bow Trade Works In Progress
« Reply #1672 on: July 07, 2013, 03:45:23 pm »
Quote from: Elktracker on July 07, 2013, 03:35:59 pm
Good looking bows everyone! Been busy so haven't been on here much but I am starting on my fourth coat of tru oil and then handle wrap and I will post some pictures before she goes out. :)

Josh

Should be cheap shipping since its just moving up the coast a ways to my house :P 8) ;D
Logged
Clatskanie, Oregon

blackhawk

  • Guest
Re: 2013 Bow Trade Works In Progress
« Reply #1673 on: July 08, 2013, 09:35:45 am »
JUST A LITTLE OVER 5 WEEKS LEFT BEFORE THE DEADLINE GUYS!!!  8)

I've been stalling to send mine out ...isnt torturing great....lol  :laugh:  ::)
Logged

Offline Knapper

  • Member
  • Posts: 1,057
  • David Atnip
Re: 2013 Bow Trade Works In Progress
« Reply #1674 on: July 08, 2013, 02:50:10 pm »
Leaving out to New Mexico for a Rendezvous, hoping there will be one of these beautiful bows waiting on me when I get back :)
knapper
Logged
Ad Dare Servire
PM104250

Offline beetlebailey1977

  • Member
  • Posts: 1,153
    • Bowhunters of South Carolina
Re: 2013 Bow Trade Works In Progress
« Reply #1675 on: July 08, 2013, 08:19:03 pm »
Yep the deadline is coming and I had to back up and punt......had to start another a few weeks back.  Now I have to crank it up but will get it done.  Also didn't help being out of commission with my surgery and illness before that.  Oh well the bow I am working on is a hackberry 61" ttt bend in the handle.
Logged
Happy hunting to all!
Bowhunters of South Carolina Executive council member
Professional Bowhunters Society Associate member

Reevesville, SC     James V. Bailey II

Offline JW_Halverson

  • Member
  • Posts: 11,928
Re: 2013 Bow Trade Works In Progress
« Reply #1676 on: July 08, 2013, 09:51:34 pm »
Quote from: Knapper on July 08, 2013, 02:50:10 pm
Leaving out to New Mexico for a Rendezvous, hoping there will be one of these beautiful bows waiting on me when I get back :)
knapper

Last year and this year the only Rendezvous I was able to make was the Fort Union event at the confluence of the Yellerstone and Misery Rivers.  How I wish I was heading out with you, Knapper!

I got a bow finished that could go for the trade, but I think it's lighter than what is fair for what the recipient asked.  I am working on v2.0 right now.  The one I finished came in right at 42# at 27", shoots as sweet as any I have ever turned out before and I really like it for myself.  Gonna pour my heart and soul into the next piece.
Logged
Guns have triggers. Bicycles have wheels. Trees and bows have wooden limbs.

Offline Weylin

  • Member
  • Posts: 2,296
Re: 2013 Bow Trade Works In Progress
« Reply #1677 on: July 08, 2013, 10:23:49 pm »
I'll be shipping out "Evenstar" tomorrow before I leave for a family trip. Maybe there will be a bow waiting for me when I get back!
Logged

Offline Weylin

  • Member
  • Posts: 2,296
Re: 2013 Bow Trade Works In Progress
« Reply #1678 on: July 08, 2013, 11:29:58 pm »
Ha! good luck getting the bow out of that tube!  :o ;D It's a vacuum seal fit. At least I don't have to worry about the bow getting jostled around.  ::)
Logged

Offline hedgeapple

  • Member
  • Posts: 1,835
Re: 2013 Bow Trade Works In Progress
« Reply #1679 on: July 09, 2013, 12:23:21 pm »
I've been on vacation the last week.  I'll get back to work on my bow Wednesday.  This bow has been battling me all the way.  I might be starting a new one by the weekend.
Logged
Dave   Richmond, KY
26" draw
Pages: 1 ... 110 111 [112] 113 114 ... 151
« previous next »