« previous next »
Pages: [1]

Author Topic: removing nocks from wooden shafts  (Read 2217 times)

0 Members and 1 Guest are viewing this topic.

Offline taxus_bacata

  • Member
  • Posts: 49
removing nocks from wooden shafts
« on: January 21, 2013, 11:22:17 am »
I have about 90 oldish shafts spined for a bow I no longer shoot. I know new plastic nocks are not expensive but I am cheap and recycle :). I would like to know if there is any way of getting the nocks off the shafts leaving them intact so they are still usable for another set of arrows?
Logged

Offline carpentertimw

  • Member
  • Posts: 42
Re: removing nocks from wooden shafts
« Reply #1 on: January 21, 2013, 11:32:41 am »
what are they glued on with? probably the only way to get them off intact is to twist them with a pair of pliers and that will probably only work if they are glued with hot glue.
Logged

Offline carpentertimw

  • Member
  • Posts: 42
Re: removing nocks from wooden shafts
« Reply #2 on: January 21, 2013, 11:35:19 am »
or you could just send me the arrows!  ;D
Logged

Offline stringstretcher

  • Member
  • Posts: 1,557
    • Traditionalarcherycommunitysite.com
Re: removing nocks from wooden shafts
« Reply #3 on: January 21, 2013, 11:50:23 am »
For me, it is not worth the price of getting or having a nock split and dry firing a bow, or worst yet, getting someone hurt.  Not for the cost of a simple nock.  JMO.
Logged

Offline taxus_bacata

  • Member
  • Posts: 49
Re: removing nocks from wooden shafts
« Reply #4 on: January 21, 2013, 11:58:56 am »
STUCK ON WITH SUPER GLUE...
Logged

Offline Stefan

  • Member
  • Posts: 167
Re: removing nocks from wooden shafts
« Reply #5 on: January 21, 2013, 01:53:34 pm »
sell the shafts or trade them for  a good supply of new nocks. sounds stupid to me to mess around getting the nocks of , if you can get them off how would you know if the nock is still safe to use
Logged
Iron rusts from disuse, water loses its purity from stagnation... even so does inaction sap the vigor of the mind.

Leonardo

Offline carpentertimw

  • Member
  • Posts: 42
Re: removing nocks from wooden shafts
« Reply #6 on: January 21, 2013, 02:37:30 pm »
super glue likely is brittle enough they would twist off. @stefen, why would they be any less safe?
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: removing nocks from wooden shafts
« Reply #7 on: January 21, 2013, 09:08:56 pm »
Dry dipping one in boiling water and see if the super glue will release.
  Another option is to make self nocks. They are more reliable than the plastic ones IMO.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Buckeye Guy

  • Member
  • Posts: 3,033
Re: removing nocks from wooden shafts
« Reply #8 on: January 21, 2013, 10:51:58 pm »
I am with Pat leave them on and start doing self nocks !
Have fun !!
GUy
Logged
Guy Dasher
The Marshall Primitive Archery Rendezvous
Primitive Archery Society
Having  fun
To God be the glory !

Offline Tom Leemans

  • Member
  • Posts: 524
Re: removing nocks from wooden shafts
« Reply #9 on: January 22, 2013, 12:32:04 pm »
I NEVER reuse nocks. Like many have said. Not worth your arm, or worse! Sell or trade the shafts if you aren't going to use them.
Logged

Offline Matt G.

  • Member
  • Posts: 149
Re: removing nocks from wooden shafts
« Reply #10 on: January 22, 2013, 08:40:36 pm »
Plastic nocks can get brittle when they're real old.
Logged
Keeping the Faith!
Matt

Offline Matt G.

  • Member
  • Posts: 149
Re: removing nocks from wooden shafts
« Reply #11 on: January 22, 2013, 08:42:56 pm »
Pm sent
Logged
Keeping the Faith!
Matt
Pages: [1]
« previous next »