« previous next »
Pages: [1]

Author Topic: sinew backing green wood  (Read 2565 times)

0 Members and 1 Guest are viewing this topic.

Offline Blacktail

  • Member
  • Posts: 1,432
sinew backing green wood
« on: January 05, 2013, 01:20:05 am »
SO,has any one sinew backed green wood...for some reason in my head it sound like a BAD idea BUT on the the other hand it sounds good..i was wondering if any one has tried it..i got some juniper and its still green and would like to find out if it would work or not...just let me know if i am thinking stupid..john
Logged

Offline PatM

  • Member
  • Posts: 6,737
Re: sinew backing green wood
« Reply #1 on: January 05, 2013, 01:25:46 am »
West Coast Natives apparently routinely sinew backed at least semi green wood. By the time you've worked a stave down with primitive tools it has likely dropped significant moisture.
Logged

Offline PaleoNinja

  • Member
  • Posts: 41
Re: sinew backing green wood
« Reply #2 on: January 05, 2013, 02:11:51 am »
Sinew Backing Semi-Green wood works well because the wood is still more flexible so it picks up A-LOT of reflex.  Floor tiller it green, sinew back it. Cant wait to see it.
Logged

Offline H Rhodes

  • Member
  • Posts: 2,172
Re: sinew backing green wood
« Reply #3 on: January 05, 2013, 04:16:31 am »
I am curious about your results too!  I have induced reflex to green staves by strapping them to a form to dry and had good results.  This sinewing idea sounds interesting.
Logged
Howard
Gautier, Mississippi

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: sinew backing green wood
« Reply #4 on: January 05, 2013, 08:57:55 am »
Never did it and never thought about it until now. Two things would concern me. One is excess moisture, mildew and mold. The other is the stave shrinking as it dries and having the backing lift.
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline Marc St Louis

  • Administrator
  • Member
  • Posts: 7,877
  • Keep it flexible
    • Marc's Bows and Arrows
Re: sinew backing green wood
« Reply #5 on: January 05, 2013, 09:04:39 am »
You would have to make sure that the wood does not warp after sinewing, be a bugger to do all that work on a piece of wood that was going to warp anyway.
Logged
Home of heat-treating, Corbeil, On.  Canada

Marc@Ironwoodbowyer.com

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: sinew backing green wood
« Reply #6 on: January 05, 2013, 09:05:43 am »
Quote from: Marc St Louis on January 05, 2013, 09:04:39 am
You would have to make sure that the wood does not warp after sinewing, be a bugger to do all that work on a piece of wood that was going to warp anyway.

Okay so three things concern me now. Heat guns and hide glue arent best friends.
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline Marc St Louis

  • Administrator
  • Member
  • Posts: 7,877
  • Keep it flexible
    • Marc's Bows and Arrows
Re: sinew backing green wood
« Reply #7 on: January 05, 2013, 09:07:18 am »
Once the hide glue is dry it can take quite a bit of heat
Logged
Home of heat-treating, Corbeil, On.  Canada

Marc@Ironwoodbowyer.com

Offline BowEd

  • Member
  • Posts: 9,390
  • BowEd
Re: sinew backing green wood
« Reply #8 on: January 05, 2013, 09:12:45 am »
Enough to realign wood Marc?
Logged
BowEd
You got to stand for something or you'll fall for anything.
Ed

Offline Bryce

  • Global Moderator
  • Member
  • Posts: 3,125
  • Pacific Ghost Longbows
Re: sinew backing green wood
« Reply #9 on: January 05, 2013, 02:10:49 pm »
PatM is right.
I would rough the bow out let sit a week or 2 then back with sinew. The chinook clatsop people sinew backed wet yew quite often. Even farther south the modoc and hupa did the same.
Green wood pulls a lot of reflex :)
Logged
Clatskanie, Oregon
Pages: [1]
« previous next »