« previous next »
Pages: 1 2 [3] 4

Author Topic: I give up, I am giving in to power tools.  (Read 8079 times)

0 Members and 1 Guest are viewing this topic.

Offline Roy

  • Member
  • Posts: 1,079
Re: I give up, I am giving in to power tools.
« Reply #30 on: December 16, 2012, 10:47:43 am »
Ya Pearl and that's why your finish always looks like a chicken scratched it out:) LMFAO
Logged

Offline JonW

  • Member
  • Posts: 1,906
Re: I give up, I am giving in to power tools.
« Reply #31 on: December 16, 2012, 11:30:52 am »
Band saw then belt sander to tiller. A little scraping to smooth it up. I guess I do use a file for string grooves though.
Logged

Offline Keenan

  • Member
  • Posts: 4,824
Re: I give up, I am giving in to power tools.
« Reply #32 on: December 16, 2012, 11:47:28 am »
For years I have admired Jamie's "stone tooled bows" However after several feeble attempts I have come to the conclusion that he is much tougher and definitely more patient then I am.  In the process I wondered if trying to make a primitive sander out of a piece of leather drenched in sap and sprinkled with crushed glass would be cheating ::) Though I can see how certain types of wood are much easier, I can't imagine, the work it would take to make a bow with stone tools from a hard wood like Osage.
« Last Edit: December 16, 2012, 10:38:19 pm by Keenan »
Logged

Offline Roy

  • Member
  • Posts: 1,079
Re: I give up, I am giving in to power tools.
« Reply #33 on: December 16, 2012, 11:51:18 am »
Keenan, back in the stone ages they used  cavemasters to hold their bows while scraping, now they use stavemasters ole boy. ::)
Logged

Offline JW_Halverson

  • Member
  • Posts: 11,917
Re: I give up, I am giving in to power tools.
« Reply #34 on: December 16, 2012, 02:57:58 pm »
Quote from: Roy on December 16, 2012, 11:51:18 am
Keenan, back in the stone ages they used  cavemasters to hold their bows while scraping, now they use stavemasters ole boy. ::)

Excellent point, Roy!

Keenan, Jamie's kids are tougher then me...he has them using flakes to prep arrow shafts!

Oh, and by the way, my conscience is eating me up.  I must confess to my mortal sin of liking my DeWalt 1/4 sheet sander.  Bwaaaaaaah!   :-[
« Last Edit: December 16, 2012, 03:13:19 pm by JW_Halverson »
Logged
Guns have triggers. Bicycles have wheels. Trees and bows have wooden limbs.

Offline toomanyknots

  • Member
  • Posts: 3,132
Re: I give up, I am giving in to power tools.
« Reply #35 on: December 16, 2012, 03:07:37 pm »
Can you get a good even thickness, ready to glue with minimal sanding laminate cut out on a table saw? My plan at first was to rip backings and laminates out on a table saw, and then run them through a thickness planer to get em nice, even, and smooth, and ready for glue up. With ripping em out on a table saw, I'm guessing I will end up with saw marks here and there, and will need to run em through a planer? Am I correct to think this? Also, anybody ever cut backings or laminates out like this guy: http://www.youtube.com/watch?v=_cEyAqhvEnM
Logged
"The way of heaven is like the bending of a bow-
 the upper part is pressed down,
 the lower part is raised up,
 the part that has too much is reduced,
 the part that has too little is increased."

- Tao Te Ching, 77, A new translation by Victor H. Mair

Offline okie64

  • Member
  • Posts: 1,134
Re: I give up, I am giving in to power tools.
« Reply #36 on: December 16, 2012, 03:47:06 pm »
Ive ripped backings on a table saw and it almost always leaves saw marks so yes you will need to get a planer or a belt sander to take the saw marks off. If you buy a thickness planer and you plan on making your backings 1/8" or smaller you will need to use a sled under your backing strips or it will try to tear chunks out of the wood due to how thin it is. A thickness sander works better than a thickness planer in my opinion.
Logged

Offline toomanyknots

  • Member
  • Posts: 3,132
Re: I give up, I am giving in to power tools.
« Reply #37 on: December 16, 2012, 03:55:40 pm »
Quote from: okie64 on December 16, 2012, 03:47:06 pm
Ive ripped backings on a table saw and it almost always leaves saw marks so yes you will need to get a planer or a belt sander to take the saw marks off. If you buy a thickness planer and you plan on making your backings 1/8" or smaller you will need to use a sled under your backing strips or it will try to tear chunks out of the wood due to how thin it is. A thickness sander works better than a thickness planer in my opinion.

Thanks for the tip!
Logged
"The way of heaven is like the bending of a bow-
 the upper part is pressed down,
 the lower part is raised up,
 the part that has too much is reduced,
 the part that has too little is increased."

- Tao Te Ching, 77, A new translation by Victor H. Mair

Offline toomanyknots

  • Member
  • Posts: 3,132
Re: I give up, I am giving in to power tools.
« Reply #38 on: December 16, 2012, 04:43:03 pm »
By the way Okie, by a sled, you mean just a piece of wood under the backing, right? This guy uses just a board adapter thing he made:

http://www.youtube.com/watch?v=zj-pNRV-jsM

I was thinking of trying that, but if the wood will rip chunks out of the wood around 1/8" thick, than I will need to take a nice straight board and send it through with the backing on top of it, is that correct?

EDIT: So I will need to use one of these?:

« Last Edit: December 16, 2012, 04:57:27 pm by toomanyknots »
Logged
"The way of heaven is like the bending of a bow-
 the upper part is pressed down,
 the lower part is raised up,
 the part that has too much is reduced,
 the part that has too little is increased."

- Tao Te Ching, 77, A new translation by Victor H. Mair

Offline bow101

  • Member
  • Posts: 2,235
Re: I give up, I am giving in to power tools.
« Reply #39 on: December 16, 2012, 05:03:41 pm »
Quote from: paulsemp on December 15, 2012, 09:34:44 pm
Confession: I tiller 99% of a bow on my belt sander


Shame on you.......using the belt sander. I use a finishing sander, less aggresive.   
Logged
"The privilege of a lifetime is being who you are."  Joseph Campbell

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,609
Re: I give up, I am giving in to power tools.
« Reply #40 on: December 16, 2012, 05:08:35 pm »
I have a 14" Grizzly bandsaw and a 6"x48" Grizzly belt/disc sander. I use the bandsaw to remove bulk wood to get me near floor tiller. After that it is a rasp and scraper only. I use the belt sander to grind the tips and overlays to match them up and for point and nock taper on arrows.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline okie64

  • Member
  • Posts: 1,134
Re: I give up, I am giving in to power tools.
« Reply #41 on: December 16, 2012, 05:26:21 pm »
By sled I just meant a thicker board underneath the thin strip. I usually just use a piece of 3/4" hickory or something like that. Never tried that guys idea in the video but it looks like it would probably work too.
Logged

Offline Newindian

  • Member
  • Posts: 734
Re: I give up, I am giving in to power tools.
« Reply #42 on: December 16, 2012, 07:19:53 pm »
Make a bow using only Stone Age tools and you shall be forgiven
Logged
I like free stuff.

Offline JW_Halverson

  • Member
  • Posts: 11,917
Re: I give up, I am giving in to power tools.
« Reply #43 on: December 16, 2012, 10:35:56 pm »
Quote from: Newindian on December 16, 2012, 07:19:53 pm
Make a bow using only Stone Age tools and you shall be forgiven

What?!?!  Give up my hunnerd dollar Veritas spokeshave.  In a pig's eye!  I ain't Ishi!
Logged
Guns have triggers. Bicycles have wheels. Trees and bows have wooden limbs.

Offline Keenan

  • Member
  • Posts: 4,824
Re: I give up, I am giving in to power tools.
« Reply #44 on: December 16, 2012, 10:39:45 pm »
 ;D ;D
Logged
Pages: 1 2 [3] 4
« previous next »