Author Topic: moisture loss to strength ratio  (Read 1061 times)

0 Members and 1 Guest are viewing this topic.

Offline BowEd

  • Member
  • Posts: 9,390
  • BowEd
moisture loss to strength ratio
« on: December 15, 2012, 10:32:17 am »
This is a bit technical I know but my mind wants to wonder about it.The percentage of moisture loss in a roughed out bow as it's drying compared to its beginning weight increases the woods strength a certain percentage.I've read it somewhere but can't seem to find the info again.I'm sure it was something Tim Baker said.I hope I explained this question correctly.
BowEd
You got to stand for something or you'll fall for anything.
Ed

Offline BowEd

  • Member
  • Posts: 9,390
  • BowEd
Re: moisture loss to strength ratio
« Reply #1 on: December 15, 2012, 10:42:50 am »
I know every moisture point loss increases the woods strength 6%.
BowEd
You got to stand for something or you'll fall for anything.
Ed

Offline George Tsoukalas

  • Member
  • Posts: 9,425
    • Traditional and Primitive Archers
Re: moisture loss to strength ratio
« Reply #2 on: December 15, 2012, 10:44:46 am »
I think it may depend on the wood? Anyway, I like hickory 6-8% and all other woofs 8-10%. Jawge
Set Happens!
If you ain't breakin' you ain't makin!

Offline BowEd

  • Member
  • Posts: 9,390
  • BowEd
Re: moisture loss to strength ratio
« Reply #3 on: December 15, 2012, 10:46:57 am »
Yea diddo on the hickory George but I remember it being a general type assumtion on all wood.But you may be right each wood could be different.
BowEd
You got to stand for something or you'll fall for anything.
Ed