« previous next »
Pages: [1]

Author Topic: Bingham Takedown Recurve - High Temp Masking Tape  (Read 1724 times)

0 Members and 1 Guest are viewing this topic.

Offline jvermast

  • Member
  • Posts: 1
Bingham Takedown Recurve - High Temp Masking Tape
« on: November 17, 2012, 06:19:27 pm »
Has anyone ever had a problem with the Binghams Masking Tape not wanting to come off the Glass of a Recurve? Just did my second limb for a takedown and the tape seems to not want to come off at all, it's almost solid for some reason.

Can I just sand it off by hand slowly and re-polish the glass?
Logged

Offline Weylin

  • Member
  • Posts: 2,296
Re: Bingham Takedown Recurve - High Temp Masking Tape
« Reply #1 on: November 17, 2012, 06:25:31 pm »
Hey there, welcome to PA. The 'Bows' section here is limited to bows made out of natural materials. Sometimes people will talk fiberglass in the 'Around the Campfire' section. An administrator will likely come by soon and move this to that section so don't be offended.
Logged

Offline okie64

  • Member
  • Posts: 1,134
Re: Bingham Takedown Recurve - High Temp Masking Tape
« Reply #2 on: November 17, 2012, 07:00:42 pm »
You'll have better luck posting that question over on tradgang on the bowyers bench. Lots of glass guys over there that will help you out.
Logged

Offline sleek

  • Member
  • Posts: 6,764
Re: Bingham Takedown Recurve - High Temp Masking Tape
« Reply #3 on: November 19, 2012, 03:58:14 am »
Use acetone, aka, fingernail polish remover.
Logged
Tread softly and carry a bent stick.

Dont seek your happiness through the approval of others
Pages: [1]
« previous next »