« previous next »
Pages: [1]

Author Topic: carbon arrows and saw trade points  (Read 2329 times)

0 Members and 1 Guest are viewing this topic.

Offline taxus_bacata

  • Member
  • Posts: 49
carbon arrows and saw trade points
« on: September 21, 2012, 07:57:57 pm »
I was wonderring, since I got a batch of carbon shafts from back when a friend of mine shot compound, how would you tie trade points on them? wooden insert??? Ideas??? thanks!
Logged

Offline M-P

  • Member
  • Posts: 876
  • PA731115
    • Traveling Surgery
Re: carbon arrows and saw trade points
« Reply #1 on: September 22, 2012, 12:37:07 am »
Howdy.    My first thought is ?????????, but assuming you're serious I would suggest just slotting the end of the shaft and gluing/ tying the point on as for a bamboo or wooden shaft.   You may need to use a lot of pitch to fill the core of the shaft and smooth over the transition.    Ron
Logged
"A man should make his own arrows."   Omaha proverb   

"There are three kinds of men. The one that learns by reading. The few who learn by observation. The rest of them have to pee on the electric fence for themselves."    Will Rogers

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,911
  • Eddie Parker
Re: carbon arrows and saw trade points
« Reply #2 on: September 22, 2012, 12:41:14 am »
I've seen it slotted and then filled with epoxy and wrapping behind the point with thread and soak in super glue. Or take an aluminum screw in adapter and slot and wrap it and then screw it in. Or,,, just send them to me and I'll send you a bunch of cane shafts and you can make you some primitive arrows. ;D
Logged
Lakeland, Florida
 If you have to pull the trigger, is it really archery?

Offline Tom Leemans

  • Member
  • Posts: 524
Re: carbon arrows and saw trade points
« Reply #3 on: September 25, 2012, 02:03:57 pm »
If it were me, I'd slot an adapter before cutting up a shaft.
Logged

Offline Rick Wallace

  • Member
  • Posts: 766
Re: carbon arrows and saw trade points
« Reply #4 on: September 25, 2012, 02:54:56 pm »
I made some last year,i epoxied a dowel about 2 inches ,,cut and trimmed then cut my notch and mounted my trade points. Worked well but I still like cane shafts better.
Logged
U.S.ARMY '86-'91  East Milton Fl.   Dont take yourself to seriously,,No one else does

Offline sharpend60

  • Member
  • Posts: 355
Re: carbon arrows and saw trade points
« Reply #5 on: September 25, 2012, 05:59:30 pm »
It should be no big trick to slot an aluminium adapter.
Logged
Pages: [1]
« previous next »