Author Topic: horn questions  (Read 3748 times)

0 Members and 1 Guest are viewing this topic.

hunterman

  • Guest
horn questions
« on: September 27, 2007, 11:06:28 am »
hey,

found a different website to get my horn from. its cheaper, the only difference is that it is cow(bull) horn instead of buffalo horn.
  will the cow horn will work?  ???

Offline Pappy

  • Global Moderator
  • Member
  • Posts: 32,204
  • if you have to ask you wouldn't understand ,Tenn.
Re: horn questions
« Reply #1 on: September 27, 2007, 11:15:08 am »
That is about all I use for tip overlays. :)
   Pappy
Clarksville,Tennessee
TwinOaks Bowhunters
Life is Good

Offline welch2

  • Member
  • Posts: 378
  • redneck heathen
Re: horn questions
« Reply #2 on: September 27, 2007, 11:37:04 am »
There are a types of cow horns that will work ,most won't. I must have tried longhorn 5 or 6 times ,it only worked once. The problem seems to be that cow horns grow in a spiral ,and each year as the length of the horn grows ,the slope of the spiral changes too.Making each years growth of horn run at a slightly different angle. So at some point (usually when I boil the horn) it delaminates between the layers.

The one bow where I got longhorn to work ,I cut the horn into 3" pieces ,these were short enough so that the spiraled layers didn't diverge.

There are  cow horns that grow straighter, not sure witch breeds.  :(
Try looking for sheep or goat horns ,I've had good luck with both.

Ralph

Offline Pappy

  • Global Moderator
  • Member
  • Posts: 32,204
  • if you have to ask you wouldn't understand ,Tenn.
Re: horn questions
« Reply #3 on: September 27, 2007, 12:11:10 pm »
Sorry didn't see his first post,didn't know what he wanted it for. ???
   Pappy
Clarksville,Tennessee
TwinOaks Bowhunters
Life is Good

jcougar

  • Guest
Re: horn questions
« Reply #4 on: September 27, 2007, 11:37:12 pm »
I used gemsbok for my hornbow project.  Try searching for gemsbok horn on ebay.  That's where I got mine.